Assembly And Startup Procedure; General Assembly Instructions; Contents - Carolina Cooker M68853 Owner's Manual

5. Assembly and Startup Procedure

WARNING
!
Before beginning assembly, read and understand
the information contained in this Owner's Guide.
!
Safety precautions and warnings are provided in
this Owner's Guide and on the appliance. If these
hazard warnings are not heeded, bodily injury or death
could occur to you or to other persons.

5.1 General Assembly Instructions

1. This appliance is specifically designed to be used
with a LP cylinder with a Type 1 cylinder valve and an
overfilling protection device (OPD).
a. A Type 1 valve can be identified by its large
external threads. Do not connect to a cylinder that
uses any other type of valve connection device.
Note: Any LP cylinders used with this appliance must meet
the standard, as outlined in "3.7 LP (Propane) Gas and LP
Cylinder Safety" on page 8.
2. Make sure all the parts have been shipped with
the appliance before starting assembly. The
shipping box should contain:
a. Base with legs and burner.
b. Cast iron pot and lid.
c. Air shutter, spring, and brass orifice connector in a
shipping bag.
d. Regulator hose assembly in a shipping bag.
Carolina Cooker®
844-478-4334

5.2 Contents

Check the contents of the box to be sure all parts are pres-
ent prior to assembly. If parts are damaged or missing, call
833-926-6537.
Item
1 Base (frame) with Legs and Burner
2 14 Quart Cast Iron Pot and Lid
3 Air Shutter and Spring
4 Regulator Hose Assembly
5 Brass Orifice Fitting
6
1
4
11
Contents
Description
Heat Shield
6
3
5
Model M68853
January 2021
Qty.
1
1
1
1
1
1
2