Beko ATP 7100 I Instruction Manual page 10

5
5.1 İmportant notes
Carefully unpack your air purifier.
•
Select a firm level place where there are no
•
obstructions to the air inlet grill or air outlet.
Remove all PE bags from filters before use.
•
Do not point air outlet towards wall.
•
6
Power button
Touch the Power button, the machine will
start running under the default "Medium"
setting, and the indicator of "Medium" setting
will illuminate.
Fan speed button
There are 3 speed settings including Low,
Medium and High for selection. Touch the Fan
speed button to select your desired speed
setting.
Dust sensor
This Air Purifier has a built-in smart dust sen-
sor which can detect the air quality of current
environment automatically, and the air qual-
ity can be shown by the air quality indicator
which can illuminate in blue, pink and red
when the air quality is very good, good and
bad accordingly.
The timer allows you to run your air purifier
at your convenience, for up to 8 hours. With 3
10 / EN
settings including 2hr, 4hr and 8hr.
This appliance has an independent Ionizer
rocker switch equipped at the bottom of
body, feature which, when turned on, releas-
es negative ions into outgoing filtered air to
help the air purification process.
Filter change
indicator
Ionizer rocker
switch
Air purifier/ Instruction Manual
Air
Outlet
Timer
Button
Fan Speed
Button