LifeSafer L250 User Manual page 18

SERVICE/MONITORING APPOINTMENTS
The reason for the lockout is shown at the bottom of the screen and may
include Service Date (meaning you are past due for service), Event Log Full,
Device Failure, Bypass, and Violations.
If you have to change a scheduled monitoring appointment, you will
need to call 855-710-2423 at least 24 hours in advance to avoid a Missed
Appointment Fee.
Early Recall:
Many Violations recorded by the device will require an Early Recall. This
means that you must return to your service provider to have the device's
data downloaded, interpreted, and reported. Depending on your
jurisdiction, you will have 3 to 10 days to return to your service provider
before the device enters Permanent Lockout.
You will be advised of the Early Recall requirement via the Lockout screen.
It will display the date and time the lockout will start along with the
Reason: Violation.
The device monitors its own functionality in accordance with fail-safe
technical requirements. Any type of malfunction or failure that could
affect the reliability or accuracy of the device's test results will also put the
device into Early Recall. This will again result in a Lockout screen advising
of the date, time, and reason for lockout.
Lockout Override Code:
The device has the ability to have a Lockout Override Code entered if your
jurisdiction allows.
• Use of the code will temporarily lift the lockout, as defined by your
jurisdiction, and will allow normal operation of the device and vehicle.
• You must call LifeSafer at 855-710-2423 for the code.
15
2031159-3_B1_GV_ L250 ClientHandbook_EN.indd 18 2031159-3_B1_GV_ L250 ClientHandbook_EN.indd 18 5/8/20 4:16 PM 5/8/20 4:16 PM