Please read through this manual to familiarise yourself with the operation of your new Elite Fitness Trimline 2000 Treadmill. Doing so will help to insure that you get the most out of your machine, enjoying safe and effective workouts ahead.
Please dispose of the packaging and any parts that have to be replaced subsequently (all parts for the unit) at suitable collecting points or containers with a view to saving the environment. — Not for therapeutic use. ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
Page 4
WARNING: Before beginning any exercise programme, consult your physician. This is especially important for persons with pre-existing health problems. The seller assumes no responsibility for personal injury or property damage sustained by or through the use of this product. SERVICE HINTS: The high quality standard of this product only will be kept if you, on a regular basis, check all screw connections and moving parts on proper fitting.
Page 5
1. Above described parts are all the parts you need to assemble this treadmill. Before you start to assemble, please check the hardware packing to make sure they are included. 2. Please find tools in the hardware pack to help you assemble this treadmill easier. ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
ASSEMBLY INSTRUCTIONS Installation Tools 5# L Key (46) 1 PC Open End Wrench (80) 1 PC STEP 1 — Lift the upright posts...
Page 7
ASSEMBLY INSTRUCTIONS STEP 2 — Use the supplied bolt(51) to fix the upright post tightly. ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
Page 8
ASSEMBLY INSTRUCTIONS STEP 3 — Use the supplied bolt (51) to fix the console...
Page 9
ASSEMBLY INSTRUCTIONS CONGRATULATIONS Assembly of your Elite Fitness Trimline 2000 Treadmill is now complete! Be sure to fully inspect your machine before using it for the first time. Failure to visually check and test and tech the assembly before use can cause damage to the Elite Fitness Trimline 2000 Treadmill and serious injury to users and bystanders and can also compromise the effectiveness of your exercise program.
Distance Displays remaining Distance or total Distance (km) Displays the running Speed (1-16km/h) Speed Adjusts the incline while in use Incline / Speed + / – Adjusts the speed while in use. Adjusts program values. ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
Page 12
Rate share the same window on the LCD screen. The Heart Rate readings are indicative only and can be inaccurate due to individual conductivity through the contact sensors. For this reason the heart rate sensors are not a medically certified device. If you require more accurate heart rate readings for medical or training purposes, please contact an Elite Fitness Sales Representative for further information and advice.
Page 14
USER INSTRUCTIONS Program - Speed Display - during the setting state the window will show P1 - P12 for programme selection. During use the Speed range will be shown - 0.8 - 12km/h. - Countdown Time Training Mode: in standby mode, press “MODE” button, the time window display will flash, Default display is 30:00 minutes, press SPEED+,- button to adjust the setting value.
Page 15
1. Check if the overcurrent protection switch is on or off. Display or power supply is 2. Check the power switch, overcurrent protection, display disconnected cables, transformer and motor are connected and in good condition. 3. Call an authorized service technician for maintenance ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
— Medium user (3-5 hours/ week) every six months — Heavy user (more than 5 hours/ week) every three months Treadmill lubricating oil can be purchased from your nearest Elite Fitness store or our Service Department. — In order to maintain and prolong the working life of your treadmill, we suggest you power off the treadmill for 10 minutes after every 2 hours of running use.
Page 17
1/2 turn AS PICTURE C — If the belt has drifted to the left. With the left adjusting bolt clockwise rotation 1/2 turn, then with the right adjusting bolt anticlockwise 1/2 turn AS PICTURE D ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
MAINTENANCE LOG Prolong the life of your treadmill by performing periodic maintenance checks. Not only does this ensure your machine is in full working order, but it will save you service costs in the long run. Every time you perform maintenance, record the date and if you can, the distance and hours operated.
B) Used with an extension cord any longer than 1.5m. C) Lubricated only with manufacturers approved silicone oil, do NOT use: WD40, CRC or any other lubricant. Consult Elite Fitness Service Department for advice or supply of the correct product. REPAIR AND MAINTENANCE SERVICE Please contact our Elite Fitness Service Department at EliteService@elitefitness.co.nz or visit...
WARM-UP EXERCISE Warm up exercise is important in preparing the muscles for activity whilst minimising the risk of injury. You may choose to warm up with a light/brisk walking pace for 5-10 minutes before stopping and performing some simple stretches. (As shown in the pictures below) —...
Note: Contact heart rate may provide inaccurate readings and is designed only as a guide Example: 220 – 39 = 181 BPM 181 x 85% (0.85) = 154 BPM (Upper Training Limit) 181 x 65% (0.65) = 118 BPM (Lower Training Limit) ELITE FITNESS TRIMLINE 2000 TREADMILL ASSEMBLY MANUAL...
PARTS We recommend 2 people assist in assembling this unit. Place all parts of the exercycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Before you start installation, inspect and prepare all parts and screws featured in this manual.
Need help?
Do you have a question about the Trimline 2000 and is the answer not in the manual?
Questions and answers