Table of Contents
Advertisement
Pairing the Remote Control to the Control Box
As the pairing procedure is already done by the manufacturer,
you can just insert 2 AAA batteries into your wireless remote
control and start to enjoy your SF-500 Adjustable Bed. If your
remote control fails to operate, please refer to troubleshooting #8.
Wireless Remote Control Operation
1. Press and Hold on 1 to raise the head of the bed.
2. Press and Hold on 2 to raise both the head & foot of the bed
together.
3. Press and Hold on 3 to raise the foot of the bed.
4. Press and Hold on 4 to lower the head of the bed.
5. Press and Hold on 5 to lower both the head & foot of the bed
together.
6. Press and Hold on 6 to lower the foot of the bed.
7. Press 7 once to preset Zero G position (Head Approx. 20
degrees, Foot Approx.40 degrees)
8. Press 8 once to preset S/F position (Head Approx. 10 degrees,
Foot Approx. 0 degrees)
9. Press 9 once to preset Flat Position. (Head and Foot 0 degree)
10. Memory Position A (M.A) is a function for you to program your
13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SF-500 and is the answer not in the manual?
Questions and answers
I unplugged my bed. Then plugged back in. Now the remote is not communicating
The remote may not be communicating with the Smart Flex SF-500 bed after being unplugged and plugged back in due to the need for re-pairing with the control box. To fix this, insert 2 AAA batteries into the remote, press and hold the Timer/All Off button until the LED backlight flashes, then release the button and press the Memory A button before the LED stops flashing. If the remote still fails to operate, refer to troubleshooting section #8.
This answer is automatically generated