pellenc EXCELION 2 LH User Manual And Operating Instructions
  1. Manuals
  2. Brands
  3. pellenc Manuals
  4. Brush Cutter
  5. EXCELION 2 LH
  6. User manual and operating instructions

pellenc EXCELION 2 LH User Manual And Operating Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ENG
.
Translation of orig-
inal user guide
BRUSH CUTTER
EXCELION 2 LH
53_154421-A
Operating instructions
04/2021
READ THE USER GUIDE CAREFULLY BEFORE USE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EXCELION 2 LH and is the answer not in the manual?

Questions and answers

Related Manuals for pellenc EXCELION 2 LH

Summary of Contents for pellenc EXCELION 2 LH

  • Page 1 Translation of orig- inal user guide BRUSH CUTTER EXCELION 2 LH 53_154421-A Operating instructions 04/2021 READ THE USER GUIDE CAREFULLY BEFORE USE...

  • Page 3: Table Of Contents

    ........................2.3. PRECAUTIONS AGAINST KICKBACK ..................2.4. SAFETY WARNINGS RELATING TO THE BRUSH CUTTER EXCELION 2 LH ......2.5. SAFETY MEASURES RELATED TO THE USE OF THE PELLENC BATTERY AND CHARG- ................................2.6. SAFETY SIGNAGE ........................2.7. PERSONAL PROTECTION EQUIPMENT ..................
  • Page 4 BRUSH CUTTER EXCELION 2 LH 53_154421-A 4.6. CONNECTING PELLENC BATTERIES TO THE TOOL ............... 4.7. DISCONNECTING THE BATTERY ....................4.8. ADJUSTING THE WORKING POSITION ..................4.8.1. ADJUSTMENT OF THE HARNESS AND FITTING OF THE CARRYING STRAP ......... 4.8.2. MOVEMENT OF THE CARRIER RING ACCORDING TO THE CENTRE OF GRAVITY ......
  • Page 5 10.1. GENERAL WARRANTIES ......................10.1.1. STATUTORY WARRANTY ......................10.1.2. COMMERCIAL WARRANTYPELLENC .................... 10.1.3. PAID AFTER-SALES SERVICE ...................... 11. COMPLIANCE STATEMENTS ................... 80 11.1. STATEMENT OF COMPLIANCE: EXCELION 2 LH ............11.2. UK DECLARATION OF CONFORMITY : EXCELION 2 LH ..........

  • Page 6: Introduction

    53_154421-A 1. INTRODUCTION Dear Customer, Thank you for purchasing your Brush cutter Excelion 2 LH. Correctly used and maintained, this tool will give a satisfactory performance for many years. Warning Your device contains numerous recoverable or recyclable materials. Return it to your dealer or, failing this, to an approved servicing centre to be treated.

  • Page 7: Sécurité

    53_154421-A 2. SÉCURITÉ • The Brush cutter Excelion 2 LH is a professional tool whose use is reserved exclusively for clearing green spaces (grasses, dense grasses, woody weeds, brambles and small shrubs). • The PELLENC company accepts no responsibility for any damage caused by improper or unspecified use different from its original intention.

  • Page 8: Personal Safety

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Note The term “Residual Current Device” (RCD) can be replaced by “Ground Fault Circuit Interrupter” (GFCI) or “Earth Leakage Circuit Breaker” (ELCB). 2.1.3. PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

  • Page 9: Service

    2.1.7. TOOL’S END-OF-LIFE MANAGEMENT When the tool reaches the end of its life, PELLENC keeps the end of life sheet of the equipment at disposal. The end of life sheet provides instructions for safely removing components.

  • Page 10: Precautions Against Kickback

    2.4. SAFETY WARNINGS RELATING TO THE BRUSH CUTTER EXCELION 2 LH Do not use the metal cutting tools near walls, fences, tree trunks, rocks or similar obstacles. Contact with such elements can cause kickback, increased ricochets and damage the cutting tool. PELLENC recommends the...

  • Page 11: Safety Measures Related To The Use Of The Pellenc Battery And Charger

    This can increase the risk of injury from flying debris. Immediately stop the Brush cutter Excelion 2 LH in the event of a change in the behaviour of the cutting tool (change in noise, increased vibrations). Check that the cutting tool is properly attached and verify its condition (no distortion, sufficiently sharp).

  • Page 12: Safety Signage

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 2.6. SAFETY SIGNAGE Read the user guide. Wear eye, ear and head protection. Wear protective gloves. Wear non-slip shoes. Beware of kickback. Beware of flying projections. Direction of rotation and maximum ro- LwA sound power level guaranteed.

  • Page 13: Personal Protection Equipment

    BRUSH CUTTER EXCELION 2 LH 53_154421-A IP54 protection rating of the tool Disconnect the battery before carrying (allover protection against dust and wa- out maintenance. ter spray). Indicates the location of the round han- dle and the distancing bar 2.7. PERSONAL PROTECTION EQUIPMENT...

  • Page 14: Description And Technical Characteristics

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 3. DESCRIPTION AND TECHNICAL CHARACTERISTICS 3.1. DESCRIPTION OF THE TOOL...

  • Page 15: Technical Features

    17. Hole for attaching the machine on a wall fixture 18. Anti-vegetation protection washer 19. Quick connector: used to connect the machine to the PELLENC tools battery 20. Carrying strap LH 22. TORX 25 wrench 23. EXCELION 2 special key 27.

  • Page 16: Chargers And Batteries Compatibility

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 3.2.2. CHARGERS AND BATTERIES COMPATIBILITY Battery Charger Remarks ALPHA 520 CB5022 ; CB5022HV *with adapter cord ref. 57248 ULIB 750 CB5022; CB5022HV *with adapter cord ref. 57238 3.2.3. VIBRATION AND NOISE EMISSION VALUES The determination of noise levels and vibration rates is based on operating conditions at maximum rated speed according to a standardised test method.

  • Page 17: Commissioning

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 4. COMMISSIONING 4.1. PACKAGE CONTENTS Check that the Brush cutter Excelion 2 LH is delivered with: • 1 carrying strap to be fitted on the harness • 1 TORX 25 wrench • 1 safety guard •...

  • Page 18: Dismounting The Round Handle And The Distancing Bar From The Tool

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Position the distancing bar (4) on the transmission shaft (14). Lock the position of the distancing bar (4) by tight- ening the screw. Note The distancing bar can be fixed either between the HMI screen and the round handle or after the round handle on the transmission shaft (9) but the distances recommended above must be observed.

  • Page 19: Fitting/ Dismounting Of The Safety Guards On The Brush Cutter

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Unscrew the knob (2) located on the round handle (3). Remove the round handle (3). 4.3. FITTING/ DISMOUNTING OF THE SAFETY GUARDS ON THE BRUSH CUTTER Caution Before any intervention on the tool, stop the machine completely and disconnect the battery. To consult the procedure for switching off your tool, refer to Section 5.1.2, “Stopping the tool”.

  • Page 20: Fitting/Dismounting Of The Protective Shield (Option)

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Fit the lower part of the safety guard (13) by aligning the screw marks. Screw the 4 screws in place with the Torx 25 key (22) to lock the position of the safety guard (13).

  • Page 21: Fitting/Dismounting The Safety Guard For The Chisel-Tooth Saw Blade (Op- Tion)

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Fitting the protective shield Fit the two parts constituting the protective shield on the transmission shaft (14). Start screwing in the 4 captive screws so as to as- semble the two parts of the protective shield.

  • Page 22: Fitting/Dismounting Of The Cutting Heads On The Brush Cutter

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 4.4. FITTING/DISMOUNTING OF THE CUTTING HEADS ON THE BRUSH CUTTER Caution Before any intervention on the tool, stop the machine completely and disconnect the battery. To consult the procedure for switching off your tool, refer to Section 5.1.2, “Stopping the tool”.
  • Page 23 BRUSH CUTTER EXCELION 2 LH 53_154421-A Using the special EXCELION 2 wrench (23) supplied with your tool, tighten the nut anti-clockwise while holding the protective bowl. Tightening torque: 35 N m. The blade is now fitted on your tool and is ready for use.

  • Page 24: Fitting/Dismounting The Mulching Blade On The Tool

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 4.4.2. FITTING/DISMOUNTING THE MULCHING BLADE ON THE TOOL Note Refer to part Section 9.2.2, “Mulching” for the description and part numbers of accessories. Caution Before any intervention on the tool, stop the machine completely and disconnect the battery. To consult the procedure for switching off your tool, refer to Section 5.1.2, “Stopping the tool”.
  • Page 25 BRUSH CUTTER EXCELION 2 LH 53_154421-A Fitted with the protective shield and the mulching blade, the brush cutter is ready for use. Note After fitting your cutting head on your tool, it is nec- essary to select it in the HMI to operate the tool. Re- fer to Section 5.5.2, “Activation of the cutting head...

  • Page 26: Fitting/Dismounting Of The Tap Cut 2 / Tap Cut 3

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 4.4.3. FITTING/DISMOUNTING OF THE TAP CUT 2 / TAP CUT 3 Fitting the TAP CUT 2 / TAP CUT 3 onto the tool Check that the anti-vegetation protection washer (18) is present on the angle gear (11).
  • Page 27 BRUSH CUTTER EXCELION 2 LH 53_154421-A Tighten the head counterclockwise to lock the posi- tion. Fitting a strimmer wire The TAP CUT wire refill system that allows it to be refilled with strimmer wire without having to open the head.
  • Page 28 BRUSH CUTTER EXCELION 2 LH 53_154421-A Screw in the middle part so that the wire enters the cutting head and becomes less and less apparent. Note The length of the strimmer wire must be suffi- cient for the blade on the safety guard to cut it.

  • Page 29: Adjusting The Length Of The Strimmer Wire On Tap Cut 2 And 3

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Remove the TAP CUT (12) from the angle gear (11). Take care not to lose the anti-vegetation protection washer (18). 4.4.4. ADJUSTING THE LENGTH OF THE STRIMMER WIRE ON TAP CUT 2 AND 3 Adjustment of the length of the strimmer wire Start the tool (refer to Section 5.1.1, “Power on”).
  • Page 30 BRUSH CUTTER EXCELION 2 LH 53_154421-A Caution Before any intervention on the tool, stop the machine completely and disconnect the battery. To consult the procedure for switching off your tool, refer to Section 5.1.2, “Stopping the tool”. Wear safety gloves. Handling of sharp elements.
  • Page 31 BRUSH CUTTER EXCELION 2 LH 53_154421-A Align the angle gear and its cover in order to match the holes located on each of the elements. Insert the Torx 25 wrench (22) supplied with your tool into the hole on the angle gear.
  • Page 32 BRUSH CUTTER EXCELION 2 LH 53_154421-A 13. Using the special EXCELION 2 wrench (23) supplied with your tool, tighten the nut anti-clockwise while holding the protective bowl. Tightening torque: 35 N m. Note After fitting your cutting head on your tool, it is nec- essary to select it in the HMI to operate the tool.

  • Page 33: Fitting/Dismounting The City Cut On The Tool

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Take the tool transmission shaft (14) out of its hous- ing. Remove the cutting head. 4.4.6. FITTING/DISMOUNTING THE CITY CUT ON THE TOOL Caution Before any intervention on the tool, stop the machine completely and disconnect the battery. To consult the procedure for switching off your tool, refer to Section 5.1.2, “Stopping the tool”.
  • Page 34 BRUSH CUTTER EXCELION 2 LH 53_154421-A Insert the ring supplied with your CITY CUT. During the first fitting, position the sticker supplied with your CITY CUT on the transmission shaft of your brush cutter as shown in the image opposite.
  • Page 35 BRUSH CUTTER EXCELION 2 LH 53_154421-A Align the marks located on the sticker previously positioned and the top of the CITY CUT head, according to the use that will be made of the tool. Tighten the screws located on the CITY CUT, to lock its position, using the TORX 25 (22) wrench supplied with your tool.

  • Page 36: Fitting The Battery On The Harness

    To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving them in contact with abrasive or dirty surfaces, or subjecting them to significant impacts (falls). For more information on PELLENC batteries see the battery instructions.

  • Page 37: Disconnecting The Battery

    Take the time to properly adjust your harness and machine. This will guarantee your ease of use and prevent any discomfort. Before use, the working position of Brush cutter Excelion 2 LH must be adjusted according to the size of the user. 4.8.1. ADJUSTMENT OF THE HARNESS AND FITTING OF THE CARRYING STRAP Adjusting the length of the harness makes it possible to adjust the "vertical position"...
  • Page 38 BRUSH CUTTER EXCELION 2 LH 53_154421-A Fitting the carrying strap on the harness: Remove the male chest buckle from the harness. Fit the male chest buckle of the carrying strap in place of the original male chest buckle of the har- ness.

  • Page 39: Movement Of The Carrier Ring According To The Centre Of Gravity

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Clip the carabiner of the carrying strap (20) into the carrying ring (7). Adjust the carrying strap to obtain the best balance of the tool. Note The tool carrying strap has an emergency release system. For more information, refer to Section 5.7, “Emer- gency release”.

  • Page 40: Using The Tool

    Make sure the tool turns on. The screen lights up in blue. Note To power on your Excelion 2 LH, it is not necessary to turn on your battery beforehand. In fact, the bat- tery is switched on from the tool handle.

  • Page 41: Stopping The Tool

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Note After powering on, your tool is locked by default. It displays "1 X CLICK TO UNLOCK ". To use it, it is necessary to unlock it (refer to Section 5.2, “Un- locking of the tool”).

  • Page 42: Unlocking Of The Tool

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 5.2. UNLOCKING OF THE TOOL To unlock the tool, Press simultaneously on the trigger (6) and the safe- ty throttle (10). The tool is now unlocked. Note The tool automatically locks itself after 5 seconds of inactivity.

  • Page 43: Remaining Battery Life

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 5.3.1. REMAINING BATTERY LIFE Remaining battery life in percentage: When the tool is on and unlocked, the main screen dis- plays battery life as a percentage by default. Note When the battery life drops below 20%, the battery pictogram flashes slowly.

  • Page 44: Energy Saving" Pictogram

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Note When less than 10 minutes of battery life remain, the screen indicates "- - -". 5.3.2. “ENERGY SAVING” PICTOGRAM In use, when the motor consumption is less than or equal to 500W, a pictogram of a leaf symbol is automatically displayed.

  • Page 45: Changing Speeds

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 5.4.2. CHANGING SPEEDS The tool has 4 working speeds. To increase a speed and gain power, press the POWER / MENU button (9) as many times as nec- essary. Note speed selector works loop: 1-2-3-4-1-2-3-4 etc.

  • Page 46: Settings Via The Hmi Menu

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Deactivating “Boost” mode Release the trigger (6). The "Boost" mode is deactivated. Note With the speed is at maximum, in "Boost" mode, the tool consumes more energy. Be sure to use the "Boost" mode only briefly and only when necessary, for example for cutting the strimmer wire or in the case of a higher density of plants.

  • Page 47: Activation Of The Cutting Head Via The Hmi Menu

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Note If you exit the menu with the trigger, the screen dis- plays "RELEASE TRIGGER". 5.5.2. ACTIVATION OF THE CUTTING HEAD VIA THE HMI MENU Selecting the right cutting head is essential to the proper functioning of your brush cutter.

  • Page 48: Information" Menu And Access To Machine Settings

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 5.5.3. "INFORMATION" MENU AND ACCESS TO MACHINE SETTINGS Access to the "Information" menu: Access the tool menu (refer to Section 5.5.1, “Browsing in the menu”). Click several times on the POWER / MENU button (9) so as to scroll through the different cutting heads available on the tool.
  • Page 49 BRUSH CUTTER EXCELION 2 LH 53_154421-A Note Below 10 minutes worked, the display shows "- - -". Resetting working time Press and hold the MENU/POWER button (9) for 1 second to reset the value. An action on the trigger exits the menu.
  • Page 50 BRUSH CUTTER EXCELION 2 LH 53_154421-A Note If the data is insufficient to calculate an average power, the display will show "- - -". Reset average power Hold down the POWER / MENU button (9) for 1 sec- ond to reset the value to 0.
  • Page 51 BRUSH CUTTER EXCELION 2 LH 53_154421-A Note If the data is insufficient to calculate an average consumption, the display will show "- - -". Reset of consumed energy Hold down the POWER / MENU button (9) for 1 sec- ond to reset the value to 0.
  • Page 52 BRUSH CUTTER EXCELION 2 LH 53_154421-A Note If the data is insufficient when starting the tool for the first time, the display will show "- - -". This value cannot be reset. 5.5.3.5. DISPLAY OF THE TIME REMAINING BEFORE THE MAINTENANCE SERVICE Click several times on the POWER/MENU but- ton (5) so as to display the menu "5--MAINTE-...
  • Page 53 BRUSH CUTTER EXCELION 2 LH 53_154421-A 5.5.3.6. LANGUAGE SELECTION Click several times on the POWER/MENU button (9) to access the "6--LANGUAGE" menu. Click on the POWER / MENU button (9) for 1 second to enter the tool's language menu. Click several times on the POWER / MENU button (9) so as to scroll through the different languages available on the tool.
  • Page 54 BRUSH CUTTER EXCELION 2 LH 53_154421-A Click on the POWER button (9) for 1 second to val- idate the language of the tool. The selected language is displayed in the middle of the screen and the display returns to the main menu.

  • Page 55: Tips For Use And Working Techniques

    Whether you want to clean or beautify your green space, remove tall grass, wild shoots, thickets or bushes cluttering up a path, for each use of your Brush cutter Excelion 2 LH, there are a suitable PELLENC cutting head. It is therefore important to choose the right cutting head according to the intended job.

  • Page 56: Advice For Optimizing The Battery

    It was designed to limit pro- jections and can therefore be used safely in urban areas. For more information on the accessories available with your Brush cutter Excelion 2 LH, refer to Section 9.2, “Cutting tools”.
  • Page 57 BRUSH CUTTER EXCELION 2 LH 53_154421-A Simple mowing/strimming • Move the tool in semi-circles from left to right while gradually advancing. • While weeding and clearing, keep the cutting tool par- allel to the ground and avoid contact of the cutting head with the ground.

  • Page 58: Emergency Release

    • The quick fit assembly of the CITY CUT cutting head on the Brush cutter Excelion 2 LH takes 20 seconds. 5.7. EMERGENCY RELEASE The Brush cutter Excelion 2 LH has a quick release system for the tool, making it possible to move away from it quickly in an emergency.
  • Page 59 BRUSH CUTTER EXCELION 2 LH 53_154421-A In case of emergency: Disconnect the quick connector from the tool (19) located on the harness. Undo the "backpack" type buckle (22). The tool will fall to the ground. Leave the tool in place and move away as quickly...

  • Page 60: Service

    Visual check of the distancing bar Lubrification of the CITY CUT blades Cleaning the CITY CUT blades Greasing the angle gear of the CITY CUT Important Have the machine serviced every 400 hours or at least once a year by an authorised PELLENC distributor.

  • Page 61: Cleaning The Tool

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 6.3. CLEANING THE TOOL After each use, clean with water: Warning Do not use a high pressure cleaner. • The safety guard (13). Note If necessary remove the safety guard (see Sec- tion 4.3, “Fitting/ dismounting of the safety guards on the Brush cutter”).

  • Page 62: Angle Gear Lubrication

    Remove the screw located on the angle gear (11) using the Torx 25 key (22) supplied with your tool. Apply 4 grams of PELLENC grease (reference 35749), once a month or every 100 hours. Grease the thread of the angle gear shaft (11) to fa- cilitate the loosening of the cutting head nuts.

  • Page 63: Dismounting/Fitting Of The City Cut Safety Guard

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 6.6.2. DISMOUNTING/FITTING OF THE CITY CUT SAFETY GUARD Dismounting Using a T20 screwdriver, unscrew the 4 screws holding the safety guard in place. Remove the casing. Fitting Position the safety guard behind the angle gear.

  • Page 64: Changing The City Cut Blades

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 6.7.2. CHANGING THE CITY CUT BLADES Dismounting Unscrew the nut located under the cutting head with a 13 mm wrench. Warning A compressed spring is located under the bowl. Carefully release the elements. Remove the two blades each positioned on a sup-...
  • Page 65 BRUSH CUTTER EXCELION 2 LH 53_154421-A On each of the blade supports, using a TORX 27 screwdriver, remove the 3 nuts to separate the blade from its support. Change the blades. Fitting Fit the blades on the corresponding blade support.

  • Page 66: Cleaning And Lubricating Blades

    To ensure the proper functioning of the CITY CUT, it is necessary: • lubricate the blades using the PELLENC lubricant spray (ref. 121633) every two working hours, • to dismount the blades at the end of the working day to clean and lubricate the assembly, see procedure below.

  • Page 67: Angle Gear Lubrication

    6.7.5. ANGLE GEAR LUBRICATION Remove the screw located on the CITY CUT using the Torx 25 key (22) supplied with your tool. Apply 4 grams of PELLENC grease (reference 35749) every 50 hours. Replace the screw located on the CITY CUT using...

  • Page 68: Incidents And Troubleshooting

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 7. INCIDENTS AND TROUBLESHOOTING 7.1. TABLE OF INCIDENTS AND BREAKDOWNS - TROUBLESHOOTING...
  • Page 69 BRUSH CUTTER EXCELION 2 LH 53_154421-A...

  • Page 70: Summary Of Display Screen Messages

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 7.2. SUMMARY OF DISPLAY SCREEN MESSAGES Fault messages appear on the HMI screen of the tool. Diagnostics Designation Probable cause Checks Solutions Repairer display codes Allow the tool User User to cool down Tool tempera-...

  • Page 71: Storage And Transport

    • Always make sure the tool is clean and its battery is charged before storing it. • The Brush cutter Excelion 2 LH must be stored away from heat, dust and humidity at an ambient temperature between 0° C and 40° C.

  • Page 72: Storing The Tool

    • Always make sure the tool is clean and its battery is charged before storing it. • The Brush cutter Excelion 2 LH must be stored away from heat, dust and humidity at an ambient temperature between 0° C and 40° C.

  • Page 73: Accessories And Consumables

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 9. ACCESSORIES AND CONSUMABLES 9.1. ROUND HANDLE ACCESSORIES Handle accessories Designation of the accessory Reference Round handle 158162 Distancing bar 158161 9.2. CUTTING TOOLS 9.2.1. WEED CONTROL TAP CUT Designation of the accessory Reference...

  • Page 74: Mulching

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Weed control blades Designation of the accessory Reference Tri-blade 158489 320 - 2.5 Safety guards Designation of the accessory Reference Standard guard MANDATORY 152042 9.2.2. MULCHING Mulching blade Designation of the accessory Reference Mulching blade...

  • Page 75: Urban Weed Control

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Chisel-tooth saw Designation of the accessory Reference Chisel-tooth saw blade 111700 9.2.4. URBAN WEED CONTROL CITY CUT Designation of the accessory Reference CITY CUT cutting head 57098 CITY CUT bowl 118271 CITY CUT safety guards...

  • Page 76: Consumables

    152778 9.4. CONSUMABLES 9.4.1. TAP CUT CONSUMABLES Name Reference PELLENC ELECTRIC Ø 2.7 mm (280 m) strimmer wire spool 159892 PELLENC Ø 2.7 mm (63 m) strimmer wire pack 159895 PELLENC ELECTRIC Ø 2.4 mm (347 m) strimmer wire spool 159893 PELLENC Ø...

  • Page 77: Warranties

    BRUSH CUTTER EXCELION 2 LH 53_154421-A Name Reference PELLENC grease tube 35749 PELLENC lubricant spray 121633 10. WARRANTIES 10.1. GENERAL WARRANTIES 10.1.1. STATUTORY WARRANTY 10.1.1.1. LATENT DEFECTS WARRANTY Apart from the commercial warranty provided for under Article II, Article 1641 of the Civil Code provides that "the...

  • Page 78: Commercial Warrantypellenc

    PELLENC Products are guaranteed under the commercial warranty as from delivery to the customer for a period of two (2) years for products connected to a PELLENC battery, and for a period of one (1) year for other PELLENC products.

  • Page 79: Paid After-Sales Service

    The DISTRIBUTOR undertakes to complete the computer commissioning declaration form, no later than eight days after the delivery of the property to the user customer, in order to activate the latter on the www.pellenc.com website under "warranties and training" in the "extranet" menu, using the identifier previously provided to them by PELLENC.

  • Page 80: Compliance Statements

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 11. COMPLIANCE STATEMENTS 11.1. STATEMENT OF COMPLIANCE: EXCELION 2 LH MANUFACTURER / ENTITY AUTHORIZED TO COMPILE THE PELLENC TECHNICAL FILE ADDRESS Quartier Notre-Dame - 84120 Pertuis (France) We hereby declare that the machine referred to below as:...

  • Page 81: Declaration Of Conformity

    BRUSH CUTTER EXCELION 2 LH 53_154421-A 11.2. UK DECLARATION OF CONFORMITY : EXCELION 2 LH MANUFACTURER / ENTITY AUTHORIZED TO COMPILE THE PELLENC TECHNICAL FILE ADDRESS Quartier Notre-Dame - 84120 Pertuis (France) We hereby declare that the machine referred to below as:...
  • Page 84 PELLENC Quartier Notre Dame - 84120 Pertuis (France)

Table of Contents