Camcorder; Digital Amplifier/Av Receiver - Grundig CINEMO 32 Manual

OMPONENT 2 INPUT AV 3
Pb Pr AUDIO L VIDEO
R
MPONENT 2 INPUT AV 3
Pb Pr AUDIO L VIDEO
R
AV2
OPTICAL
28
USING EXTERNAL DEVICES

Camcorder

Connecting a camcorder
Connect the yellow
1
the video output socket of the camcorder (VHS, Video 8) using
an RCA cable (video signal).
or
Connect the
and the S-Video output socket of the camcorder (VHS, Hi 8)
using an S-Video cable.
Connect the red and white
2
the television to the audio output sockets of the camcorder using
RCA cables (audio signal).
Note:
There must not be video signals at the
»AV 3
picture disturbances.
S-VIDEO
Operation with a camcorder
Press »AV«, press »P+« or »P-« to select the »AV3« or »S-
1
VIDEO« preset and press »OK« to confirm.
Switch on the camcorder, put in a cassette and start playback.
2
S-VIDEO

Digital amplifier/AV receiver

Connecting the digital amplifier/AV receiver
Connect the »OPTICAL« socket on the television and the corre-
1
ANT. IN
sponding socket on the amplifier using an optical cable.
»AV 3 VIDEO« socket of the television and
»AV 3 S-VIDEO« socket (yellow) of the television
S-VIDEO« sockets at the same time. This could lead to
WT–A
»AV 3 R AUDIO L« sockets on
»AV 3 VIDEO« and
Y Pb Pr
R L ANT. IN
HDMI INPUT RGB INPUT AUDIO INPUT COMPONENT INPUT AV1 AV2 AC INPUT
AUDIO INPUT (480i/480p//720p/1080i OPTICAL
_______________