Num Lock; Speaker; Processor 1; Processor 2 - Dell 4100 User Manual

Boot Sequence
The category can be set to
BOOT SEQUENCE
default), , or
C: THEN A: C: ONLY
Setup Prompt
Setting this category to
ENABLED
message Press <F2> to enter Setup to appear
while the system is booting up.
POST Errors
Setting this category to
ENABLED
message Press <F1> to resume, <F2> to
enter Setup to appear and causes the system to pause
if an error occurs while the system is booting up.
Diskette Drive Check
Setting this category to
ENABLED
system to seek diskette drives during system boot-up.
Setting this category to
DISABLED
time.
Reset Button
Setting this category to
ENABLED
the system when the reset button is pushed.

Num Lock

This category controls the state of Num Lock mode at
system boot. When Num Lock is set to
bank of keys on your keyboard provides the mathemati-
cal and numeric functions shown at the top of each key.
When Num Lock is set to
control functions according to the labels on the bottom of
each key.

Speaker

Use this category to set the built-in speaker to
default) or .
OFF

Processor 1

Identifies the type of microprocessor installed in the
PROCESSOR1 socket on the system board. This cate-
gory has no user-selectable options.
4-6 Dell PowerEdge 4100/180 and 4100/200 Systems User's Guide
A: THEN C:
.
(the default) causes the
(the default) causes the
(the default) causes the
speeds system boot-up
(the default) will reset
the rightmost
ON,
, these keys provide cursor-
OFF
(the
ON

Processor 2

(the
Identifies the type of microprocessor installed in the
PROCESSOR2 socket on the system board. This cate-
gory has no user-selectable options.

Base Memory

BASE MEMORY
to MS-DOS programs that do not use extended or
expanded memory. This category has no user-selectable
options.
The default value for the
, which includes 1 kilobyte (KB) reserved for sys-
640 KB
tem use.
The value given in the
bytes rather than megabytes. To convert kilobytes to
megabytes, divide the kilobyte total by 1024.

Extended Memory

EXTENDED MEMORY
options) indicates the amount of system memory avail-
able as extended memory.
The value given in the
megabytes.

Level 2 Cache

Displays the amount of integrated level-2 cache memory
in the microprocessor module. This category has no user-
selectable options.

Video Memory

Displays the amount of video memory installed in the
built-in video subsystem. This category has no user-
selectable options.

Service Tag

displays the system's five-character service
SERVICE TAG
tag number, which was programmed into NVRAM by
Dell during the manufacturing process. Reference this
number during technical assistance or service calls. The
service tag number is also accessed by certain Dell sup-
port software, including the diagnostics software.
displays the amount of memory available
BASE MEMORY
category is in kilo-
BASE MEMORY
(which has no user-selectable
EXTENDED MEMORY
category is
category is in