Table 1-2. Jumper Descriptions - Dell 2100 Service Manual

1-16 Dell PowerEdge 2100/180 and 2100/200 Systems Service Manual

Table 1-2. Jumper Descriptions

Jumper Description
200MHZ Microprocessor speed
180MHZ Microprocessor speed
PASSWD Password enable/disable
EISA Clear EISA configuration
settings
VGA Integrated VGA controller
enable/disable
CARDBIOS Used for trouble shooting
Settings
Installed if the micro-
processor's internal speed is
200 MHz, otherwise, not
installed.
Installed if the micro-
processor's internal speed is
180 MHz, otherwise, not
installed.
Jumper installed to activate
boot password feature.
Install the jumper and boot
the system to clear the con-
figuration settings.
Remove the jumper and use
the EISA Configuration Util-
ity to configure the system.
Install to enable the inte-
grated VGA controller.
Install the jumper to boot
system from BIOS expan-
sion card.
Remove the jumper to allow
normal boot operation from
BIOS.