Stabilization; Configuring And Implementing Intelligent Tracking - Bosch AUTODOME IP starlight 7000i Installation Manual

AUTODOME IP starlight 7000i
4.1

Stabilization

Surveillance cameras are susceptible to vibrations caused by wind or vibrations emanating
from the medium to which the camera is attached. Cameras attached to a pole, roof, or to a
bridge are especially vulnerable. Bosch offers the following recommendations to stabilize an
AUTODOME camera and to decrease the affects of vibration on transmitted images, privacy
masks, and Intelligent Tracking.
Pole and Mast Mounts
–
–
–
Roof Mounts
–
–
–
–
Extreme Mount Applications
Unique camera mounting applications that are impacted by extreme high winds, heavy traffic,
or other conditions may require additional measures to stabilize the camera. Contact a
manufacturer that specializes in passive vibration suppression using either damping or
isolation.
4.2

Configuring and Implementing Intelligent Tracking

Configuring Intelligent Tracking
The camera utilizes the built-in Intelligent Video Analytics (IVA) to continuously follow an
individual or object even if it passes behind a Privacy Mask or a stationary object. The camera
uses objects detected by IVA in a stationary preset position to activate the Intelligent Tracking
feature.
The Intelligent Tracking feature allows continuous on-screen following of an individual or an
object. This feature operates by recognizing an object in motion and zooms in to
approximately 50% (default Tracker zoom threshold) of the field of view for an average target
height of six feet. This feature controls the pan/tilt/zoom actions of the camera to keep the
selected object in the scene.
Bosch Security Systems
Use a pendant arm with the Pole Mount Adapter (VG4-A-9541).
– Do not attach a parapet mount to a pole or mast.
Use a pole designed specifically for CCTV cameras:
– Do not use a tapered pole.
– Do not use a pole that has signs or other equipment attached.
Consult EPA rating / Wind load data to select an appropriate pole.
Mount the camera in the most stable location on the roof.
Avoid locations affected by vibrations such as those caused by a rooftop air conditioner.
Use guy wires to stabilize the AUTODOME against strong winds.
Use the LTC 9230/01 Flat Roof Mount Adapter where appropriate. This adapter is made
specifically for AUTODOME roof applications.
Installation Manual
Pre-installation Checklist | en
2021-03 | 1.2 |
19