Configure Blf; Extension Settings - Yealink SIP-T42U Configuration Manual

Make sure that you replace the Hostname from this example with your PBXware Hostname.
Make sure that DNS server is configured to automatically route registration request to
PBXware which is actually under another domain name. Example: newbicomsystems.com.
Check New Config
Select Power on + Repeatedly.
Click the Confirm button.
You will have to wait some time for the device to save changes.
Click the Auto Provision button to run the Auto provisioning process, after which you will be
asked to confirm the action. To continue, click the OK button.
The Auto provisioning process will start during the phone's reboot process, The phone will
pick up an appropriate configuration file from PBXware. If everything is done as described
above, you should have successfully registered your phone to PBXware.
Dial *123 to verify registration.

Configure BLF

This section describes how to configure BLF (Busy Lamp Field) for Yealink T42U.
The following topics are covered:

- Extension Settings

- Phone Settings
Extension Settings
Log in to the PBXware's web administration interface
Open a new browser window and enter the IP address in order to access the PBXware's web
administration login page. Example: http://192.168.1.10.
Log in to PBXware with your e-mail address and password.
Edit Extension.
On the Extensions page, click the Edit icon corresponding to your Extension.
Click the Advanced Options button.
Navigate down to the Auto Provisioning and Presence group of settings.
Make sure that Auto Provisioning is set to Yes.
Make sure that Presence is set to "Yes".
Click the Save button in order to save changes.