Table of Contents
Advertisement
◎ The wired LAN function of the product will be stopped if the
communication with connected devices using a LAN cable (commercially
available) is not be performed for a set period of time. If you reconnect
the cable after the wired LAN function is stopped, press f to turn
the screen on.
Setting Tool
You can configure the various functions of the product using a web browser
from a PC or mobile device connected to the product.
This example describes the procedure for connecting a PC via Wi-Fi
screens may differ depending on your operating system and web browser.
• When using the setting tool, turn off the screen of the product. If a screen
other than the touch panel lock screen is displayed when using the setting
tool, the settings may be canceled and you may be logged out of the setting
tool.
Displaying the Setting Tool
A
Start the PC and connect to the product.
B
Start a web browser and enter "http://(host IP address of
the product)" or
• The default setting for "Host IP Address" is "192.168.128.1".
• The setting tool "Home" screen will be displayed.
Click "Login" → enter password → click "Login" .
C
• Enter uppercase and lowercase characters correctly.
• The default password is the last 6 digits of the IMEI information
(international mobile equipment identity number).
• You can check the IMEI information (international mobile equipment
identity number) by operating the product as follows.
Swipe left on home screen → [About Device].
ttp://web.setting）
"（
h
" in the address bar.
®
. The
44
Advertisement
Table of Contents
