Safety; Intended Use; Safety Regulations; Safety Assessment - Pilz PNOZ po3.2p Operating Manual

PNOZ po3.2p

Safety

Intended use

The PNOZ po3.2p is an expansion module of the safety system PNOZpower. It may only
be used with a base unit or a control module of the modular safety system PNOZpower.
The expansion module meets the requirements of EN 60947-5-1, EN 60204-1 and
VDE 0113-1.
The max. achievable safety level depends on the base unit. The expansion module may not
exceed this. The safety-related characteristic values stated under
istic data [
teristic values.
The following is deemed improper use in particular:
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
}
Use of the product outside the technical details (see
}

Safety regulations

Safety assessment

Before using a unit it is necessary to perform a safety assessment in accordance with the
Machinery Directive.
Functional safety is guaranteed for the product as a single component. However, this does
not guarantee the functional safety of the overall plant/machine. In order to achieve the re-
quired safety level for the overall plant/machine, define the safety requirements for the
plant/machine and then define how these must be implemented from a technical and organ-
isational standpoint.
Operating Manual PNOZ po3.2p
20677-EN-06
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
14] can only be achieved if the base unit also exhibits these safety charac-
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
safety-related character-
Technical details [ 11]).
5