Dell Dimension 2350 Owner's Manual page 77

Ensure that the card is fully seated and that its bracket is within the card slot.
fully seated
Secure the filler bracket onto the end of the card with the screw you removed in step 7.
9
Connect any cables required for the card as described in the card documentation.
10
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can
cause damage to the equipment.
Replace the computer cover (see page 90).
11
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
Connect your computer and devices to electrical outlets, and turn them on.
12
Install any drivers required for the card as described in the card documentation.
13
not fully seated
bracket within slot
bracket caught
outside of slot
77
Adding Pa rts