Page 5
Assembly Step one Attach the front (16) and rear feet (12) to the frame using the nuts (8), washer (9) and bolts (10). Step two Attach the handlebar post (37) inserting into the head tube on the frame. Using knob (4) to adjusts and tightens the height in proper position.
Part list No. Name No. Name Unit Unit Saddle Bottle Alloy bind clip ( R) & ( L ) Bolt & washer for spring plate Knob spring Belt Knob w/washer Handlebar post Crank arm set SET 38 Rubber sleeves Outer belt guard End plug Foot tube nut Seat slider...
Instruction Use 1) The model H918A-1 is designed to be used as a “spin “ cycle in fitness studios and health clubs. It has a fixed wheel driven flywheel and should only be used under professional supervision. 2) Installation – it is important that the H918A-1 is correctly assembled and we recommend that suitably qualified personnel carry out installation and assembly 3) Handlebar and seat adjustment.
Maintenance Chart DESCRIPTION Daily Weekly Monthly Quarterly Annually Wipe machine down Spray with WD40 or similar Visual check Check security of handle bar post & seat post Check security of saddle Remove handlebar post and clean tube Remove seat and clean tube Check brake pads for wear-align Check brake adjustment Check security of all knobs &...
Limited Warranty This product carries the following guarantee against manufacturing defects: * Frame is warranted for 2 years from the date of purchase. * Components are warranted for 1 year. * Warranty is only valid for the original purchaser. * Labor and freight charges are not included. * Normal wear, neglect, abuse, accidents, improper assembly or maintenance, or the installation of parts or accessories not compatible with the original intended use of the bike, as sold, are not covered by the warranty.
Need help?
Do you have a question about the SPRINT BIKE TWO H918A-1 and is the answer not in the manual?
Questions and answers