Communication Setup; Restore Default - PTZ Optics PT30X-NDI-GY User Manual

Auto Focus L: Lock focus in current position, optional
items: Off, On
OSD TimeOut: Auto close OSD, optional items: 2.5min,
Off
MotionSync: Trisynchronous preset call, optional items:
Off, On
Max Speed: Maximum MotionSync Speed, optional items:
185 – 230 (Effective only when MotionSync is "On")

8. COMMUNICATION SETUP

Move the main menu cursor to
[INFORMATION], and press the [HOME] key to enter the
communication setup page, as shown in the following figure.
COMMUNICATION SETUP
V_Address
V-AddrFix
Net Mode
Baudrate
Select Item
Change Value
[Menu] Back
V_Address: Camera VISCA address: optional items: 1 ~
7
V-AddrFix: Fixed VISCA address: optional items: Off,
On
Net Mode: Optional items: Serial, Paral
Baudrate: Optional items: 2400, 4800, 9600, 38400
P_D_Address: Pelco-D Address, optional items: 0 - 254
P_P_Address: Pelco-P Address, optional items: 0 - 31
1
Off
Serial
9600
Page 33 of 50

9. RESTORE DEFAULT

Move the main menu cursor to [RESTORE DEFAULT], and
press the [HOME] key to enter the restore default page, as
shown in the following figure.
RESTORE DEFAULT
Restore?
P/T Limit Reset No
Change Value
[Home] OK
[Menu] Back
Restore?: Confirm restore factory settings, optional items:
Yes, No.
P/T Limit Reset: Confirm P/T Limit Reset, optional items:
Yes, No.
Note: Press [HOME] button to confirm, all parameter restore
default, include IR Remote address and VISCA address.
No
Rev 1.6 8/20