Pioneer L50USD14N Instruction Manual page 82

10
Other Information
Password
GB
Lost password
Some channel appear to be missing
When using the P+/- button some
channel are missing
There is a problem in VGA mode.
The signal is out of range (Invalid
format)
Vertical bar or stripe on background
& horizontal incorrect position
Screen colour is unstable or shows a
single colour
TV is slow to respond when a VGA
cable is attached
Channels are not recording.
The PVR functions are not available
in every country
Not all channels record
Smart TV will not work properly
You are not connected to the
internet
Smart TV is very slow
Smart TV has frozen/locked up
TV picture is not in 3D
You have not selected 3D mode
You are in Left Eye or Right Eye
mode
Are your 3D glasses switched on?
Glasses are flickering
82
Pioneer L50/55USD14N_IB_English.indd 82
• The master password is "0423" enter this password and then change your password
to a number you will remember.
• You may be selecting the channels in your Favorite list. Select ALL in the channel list
and this will allow you to view all the channels.
• You may have set some channels to be skipped, check the Channel Skip menu on
page 44.
• Adjust the resolution, horizontal frequency, or vertical frequency.
• Use Auto configure or adjust clock, phase, or H/V position.
• Check the signal cable.
• Reinstall the PC video card.
• Check your VGA cable, it must be a fully wired cable.
• PVR functions are not available in Finland.
• You can only record free to air channels.
• You may have you run out of space on your USB storage device. Delete some files or
use another USB storage device.
• Run a connection test from the Network setting menu.
• Is your router switched on? Have you selected wireless as your connection method?
• Have you connected your Ethernet cable? Connect the cable.
• Try to reconnect by selecting Wireless setting in the Network settings menu.
• Check the location of your router, if you are using wireless move the router closer to
your TV.
• Try connecting using an Ethernet cable, this will give you the quickest connection
speeds.
• Check your broadband speeds you may need to upgrade.
• This can happen sometimes its normal, press the SMART TV button to return back
to the main Smart TV menu.
• Press the TV button, then return to smart TV by pressing the SMART TV button.
• Select your desired 3D mode in the Picture menu.
• Switch your TV back to normal TV mode and wait 30 seconds. Your 3D glasses will
automatically switch into standby. Then switch back to your 3D movie and press the
STANDBY button on the 3D glasses.
• Pair your 3D glasses to the TV.
• Try switching the lights off, the 3D glasses may not work properly due to the
interference from magnetic fluorescent light (50Hz/60Hz).
25/04/2014 10:38