Troubleshooting; Error Code / Fault Display / Signal - IKEA DISKAD Manual

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting
information before contacting after-sales service. This will avoid unnecessary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist staff.
●
Only use genuine spare parts when repairing the appliance.
●
If the power cord of this appliance is damaged, it must be replaced with a special
●
connection cable, which is available from the manufacturer or his Customer Ser-
vice.

Error code / Fault display / Signal

FAULT
E:07 lights up.
E:12 lights up.
E:14 lights up.
E:15 lights up.
E:16 lights up.
E:18 or indicator for
water supply lights up.
CAUSE
Intake opening is
covered by items of
tableware.
Appliance has detected
calcified heating ele-
ment.
Water protection sys-
tem is activated.
Water protection sys-
tem is activated.
Water is continuously
running into the appli-
ance.
Supply hose is kinked.
Water tap is turned off.
Water tap is jammed or
furred up.
Filter in the water sup-
ply is blocked.
TROUBLESHOOTING
Re-arrange the tableware in
●
the appliance so the intake
opening → Page 16 is no
longer obstructed.
Descale the appliance.
1.
Operate the appliance with
2.
the Water softening system.
Turn off the water tap.
1.
Call Customer Service.
2.
Turn off the water tap.
1.
Call Customer Service.
2.
Turn off the water tap.
1.
Call Customer Service.
2.
Install the supply hose
●
without kinks.
Turn on the water tap.
●
Turn on the water tap.
●
The flow rate must be at
least 10 l/min when the wa-
ter supply is open.
Switch off the appliance.
1.
Pull out the mains plug.
2.
Turn off the water tap.
3.
44