Using Other Applications ..............14 be different from the actual displays or faceplates. • Operations are explained mainly using buttons on the faceplate. KENWOOD Remote application • English indications are used for the purpose of explanation. You can TuneIn Radio/TuneIn Radio Pro select the display language from the [FUNCTION] menu.
Before Use IMPORTANT • If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. • To ensure proper use, please read through this manual before using this • Depending on the types of cars, the antenna will automatically extend product.
Basics Faceplate Loading slot Display window* How to reset Eject button Volume knob * Only for illustration purpose. On the faceplate Press B SRC. Turn on the power • Press and hold to turn off the power. Adjust the volume Turn the volume knob.
Getting Started Basics Remote control (RC-406) Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when Select the display language and cancel the demonstration using for the first time. When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], see page 7), the display shows: “SEL LANGUAGE” ...
Getting Started Default: [XX] Set the clock and date [DISPLAY] Press the volume knob to enter [FUNCTION]. [EASY MENU] When entering [FUNCTION]... Turn the volume knob to select [CLOCK], then press the knob. [ON]: [LCD DISPLAY] illumination changes to white color. ; [OFF]: [LCD DISPLAY] illumination remains as [COLOR SELECT] color.
[F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>. [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.
Page 8
Radio • To cancel, press or DIRECT. [AF SET] [ON]: Automatically searches for another station broadcasting the same • If no operation is done for 10 seconds after step 2, Direct Access Tuning is program in the same Radio Data System network with better reception automatically canceled.
CD/USB/iPod Insert a disc Connect an iPod/iPhone Label side Eject disc USB input terminal iPod/ iPhone KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2 The source changes to iPod USB automatically and playback starts. • You can also connect iPod/iPhone via Bluetooth. (Page 15) *1 KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not in use.
Page 10
CD/USB/iPod You can also select the music drive from the [FUNCTION] menu. On the faceplate On the remote control Press the volume knob to enter [FUNCTION]. Press 6 IW. Press ENT IW. Play back/pause Turn the volume knob to select [USB], then press the knob. Reverse/Fast-forward Press and hold Press and hold...
Page 11
CD/USB/iPod [SKIP SEARCH] setting Select a file to play Press the volume knob to enter [FUNCTION]. From a folder or list Turn the volume knob to select [USB], then press the knob. Turn the volume knob to select [SKIP SEARCH], then press the knob. •...
Spotify You can listen to Spotify on iPhone/iPod touch (via Bluetooth or via USB On the faceplate On the remote control input terminal) or Android device (via Bluetooth) (page 15). Press 6 IW. Press ENT IW. Play back/pause Preparation: Press S*1 / T. Press S*1 / T (+).
Spotify You can listen to music from a portable audio player via the auxiliary input Search for a song or station jack. Press Preparation: Turn the volume knob to select a list type, then press the knob. Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6) The list types displayed differ depending on the information sent from Spotify.
Using Other Applications KENWOOD Remote application Default: [XX] You can control the KENWOOD car receiver from iPhone/iPod touch (via [REMOTE APP] Bluetooth or via USB input terminal) or Android device (via Bluetooth) using [SELECT] Selects the device ([IOS] or [ANDROID]) to use the application.
Bluetooth features may not work with this Press B SRC to turn on the unit. unit. Search and select the name of your receiver (“DPX-5200BT”) on the • Be sure to turn on the Bluetooth function of the device to make the Bluetooth device.
Bluetooth® The following operations may differ or be unavailable depending on the Auto Pairing connected phone. When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to On the faceplate On the remote control [ON].
Page 17
Bluetooth® *1 This adjustment will not affect the volume of the other sources. Default: [XX] *2 Press and hold VOL to continuously increase the volume to 15. [SETTINGS] *3 Operations may vary according to the connected Bluetooth device. [AUTO ANSWER] [1] to [30]: The unit answers incoming call automatically in the selected time (in seconds).
Page 18
Bluetooth® Make a call using voice recognition [PHONE BOOK] (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold VOICE to activate the voice recognition of the phonebook contains many contacts).
Page 19
To return to the previous setting item, press Press and hold “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display. Default: [XX] Search and select the name of your receiver (“DPX-5200BT”) on the [BT MODE] Bluetooth device. [PHONE SELECT] Operate the Bluetooth device to confirm pairing.
Bluetooth® Bluetooth — Audio On the faceplate Repeat play Press 4 repeatedly. [ALL REPEAT]/[FILE REPEAT]/[GROUP REPEAT]*/ [REPEAT OFF] Random play Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*. • Press 3 to select [RANDOM OFF]. Select a file from a folder/list Refer to “Select a file to play” on page 11. Switch between connected Press 5.
Audio Settings [MANUAL EQ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [62.5HZ] [LEVEL] [LEVEL –9] to [LEVEL +9] ([LEVEL +5]): Adjusts the level to memorize for each source.
Page 22
Audio Settings Crossover settings [SUBWOOFER SET] [ON]: Turns on the subwoofer output. ; [OFF]: Cancels. [FADER] (Not applicable if 3-way crossover is selected.) Below are the available setting items for 2-way crossover and 3-way [R15] to [F15] ([0]): Adjusts the front and rear speaker output balance. crossover.
Display Settings Audio Settings When 3-way crossover is selected: Zone identification for color settings and brightness settings [TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER] – You can only select [WOOFER] if a setting other than [NONE] is selected for [WOOFER] of [SPEAKER SIZE]. (Page 23) •...
Page 26
Display Settings Default: [XX] [CLOCK] [DISPLAY] [CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. [COLOR SELECT] Selects illumination colors for [ALL ZONE], [LCD DISPLAY], [KEY 1] and [KEY 2] separately. [DEMO MODE] [ON]: Activates the display demonstration automatically if no operation is 1 Select a zone.
Press B SRC repeatedly to enter STANDBY. Connect to your vehicle’s steering remote harness. Press the volume knob to enter [FUNCTION]. Contact your KENWOOD dealer for details. Turn the volume knob to select [SYSTEM], then press the knob. Rear panel Turn the volume knob to select [USER S.REMO], then press the knob.
Installation/Connection Basic procedure This section is for the professional installer. Remove the key from the ignition switch, then disconnect the For safety’s sake, leave wiring and mounting to professionals. Consult the terminal of the car battery. car audio dealer. Connect the wires properly. See “Wiring connection”...
Page 29
Installation/Connection Installing the unit (in-dash mounting) Installing in Toyota cars Install onto the car brackets using the supplied screws (C) or (D). The Install onto the car brackets using the supplied screws (C) or (D). Use screw holes differ depending on the model of the cars. the mounting holes ( ) or ( ) that fit the car brackets.
Page 30
If no connections are made, do not let the wire come out from the tab. White/Black For 3-way crossover: Mid range speaker (left) Gray Brown To front speaker (right)/ To connect the Kenwood navigation system, refer your Gray/Black For 3-way crossover: Mid range speaker (right) (Mute control wire) navigation manual Green...
More information Learning steering remote control (Page 27) For: – Latest firmware updates and latest compatible item list Output terminals (See the following “Connect external amplifiers via output – KENWOOD original application terminals”.) – Any other latest information Visit <www.kenwood.com/cs/ce/>.
• The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
Troubleshooting References Source name Display information: Main display (supplementary) Symptom Remedy STANDBY Source name (Date) Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. RADIO Frequency (Date) “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of For FM Radio Data System stations only: THEN PWR ON”...
Page 34
Troubleshooting Symptom Remedy Symptom Remedy Elapsed playing time is not This depends on the recording process earlier (disc/USB). “COPY PRO” A copy-protected file is played (disc/USB). correct. “NO DEVICE” Connect a device (USB/iPod/iPhone), and change the “READING” keeps flashing. • Do not use too many hierarchical levels and folders. source to USB or iPod USB again.
Page 35
Troubleshooting Symptom Remedy Symptom Remedy Echo or noise is heard during • Adjust the microphone unit’s position. (Page 15) “SWITCHING NG” The connected phones might not support phone a phone conversation. • Check the [ECHO CANCEL] setting. (Page 17) switching feature. Phone sound quality is poor.
Specifications Frequency Range 87.5 MHz — 108.0 MHz (50 kHz step) Laser Diode GaAIAs Usable Sensitivity 8.2 dBf (0.71 μV/75 Ω) Digital Filter (D/A) 8 times over sampling (S/N = 30 dB) Spindle Speed 500 rpm — 200 rpm (CLV) Quieting Sensitivity 17.2 dBf (2.0 μV/75 Ω) Wow &...
Page 37
Specifications Version Bluetooth 4.2 Frequency Response (±3 dB) 20 Hz — 20 kHz Frequency Range 2.402 GHz — 2.480 GHz Input Maximum Voltage 1 000 mV RF Output Power (E.I.R.P.) +4 dBm (MAX), Power Class 2 Input Impedance 30 kΩ Maximum Communication Range Line of sight approx.
Page 38
Specifications • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards.
Page 39
SOFTWARE LICENSE AGREEMENT Article 4 Right pertaining to the Licensed Software The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is Any and all copyrights and other rights pertaining to the Licensed Software and related documents copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or which Users shall follow in order to use the Licensed Software.
Page 40
Important Notice concerning the Software Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed -jansson Software, any related documents and copies thereof within two (2) weeks from such date of termination. Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org>...
Page 41
-CMP sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ The MIT License (MIT) Copyright (c) 2014 Charles Gunyon Copyright (c) 2000-2001, Aaron D. Gifford All rights reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without You may obtain a copy of the license at limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the...
Page 42
Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum Author: Chris G. Demetriou (www.tron.org) Permission to use, copy, modify and distribute this software and its documentation is hereby granted, BSD-3-Clause provided that both the copyright notice and this permission notice appear in all copies of the software, Copyright (c) 2000-2001, Aaron D.
Page 43
ﺍﻟﻤﻮﺍﺻﻔﺎﺕ • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards.