Table of Contents
Advertisement
Available languages
Available languages
INSTALLING BATTERIES
1. Slide off the battery cover to
open the battery compartment.
2. Install or replace the 2 "AAA"
alkaline batteries according to
the indications inside the
battery compartment.
NOTE:
When removing batteries, pull black ribbon forward.
3. Replace the battery cover.
Replace the batteries if:
• The low battery symbol appears on the display.
• When any button is pressed and nothing is displayed on the screen.
NOTE:
• Date and time will need to be reset if batteries are removed or
replaced.
• Replace all batteries at one time (as simultaneous set). Do not mix
old and new batteries.
• Use only 1.5V "AAA" alkaline batteries. Do not mix alkaline, standard
(carbon-zinc) or rechargeable (Ni-Cad, Ni-MH, etc.) batteries.
• When installing batteries, observe proper +/- polarities. Incorrect
installation of batteries may cause damage to the unit.
12
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the DELUXE WRIST WGNBPW-210 and is the answer not in the manual?
Questions and answers
how do you set this blood pressure monitor
To set the Walgreens Deluxe Wrist Blood Pressure Monitor WGNBPW-210:
1. Press the button to make the Month blink.
2. Press “MEM” to increase the Month.
3. Press Confirm to save the entry.
4. Repeat the same steps to set Day, Year, Hour, and Minute.
Note: If using the monitor for the first time, remove the protective film from the display screen.
This answer is automatically generated
WHAT IS SYSTOLIC PRESSURE