Operating Instructions - Skil JS314901 Owner's Manual

OPERATING INSTRUCTIONS

Tool-Free Blade Installation
WARNING
from the power source before assembling
parts, making adjustment, or changing blades.
1. Lift the tool-free blade change cover up and
insert the blade (teeth facing the cutting
direction) into the slot of the tool-free blade
change holder (Fig. 2).
2. Release the tool-free blade change cover to
lock the blade in place.
3. Pull down on the blade to verify that the
blade is securely locked in place.
NOTICE:
When inserting the saw blade, the
back of the blade must rest in the groove of the
guide roller (Fig. 3).
NOTICE:
The tool accepts most commonly
available T-shank and U-shank blades.
4. To remove the blade, lift the tool-less blade
change cover up and carefully remove the
blade.
Trigger Switch
The tool can be turned "ON" or "OFF" by
squeezing or releasing the trigger (Fig. 4).
To prevent personal injury,
always disconnect the plug
Fig. 2
Tool-Free Blade
Change Cover
Fig. 3
Blade
Roller
Guide
Fig. 4
11