Factory Defaults - Miele G 5260 Operating Instructions Manual

Programme options

Factory defaults

If you have altered any settings, you
can reset them back to the factory de-
fault settings.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the  button in and, whilst
holding it in, switch the dishwasher
on using the  button.
Keep the  button pressed in for at
least 4 seconds until the  indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
60
 Press the  programme selection
button 19 times.
The top left programme indicator light
will emit 1 long flash and 9 short flashes
at intervals.
The flashing sequence in the display in-
dicates whether the setting deviates
from the factory default:
-  : All values are factory default set-
tings.
-  : At least one setting has been
changed.
 To reset the dishwasher to the factory
default settings, press the  button.
The setting is now saved.
 Switch the dishwasher off with the 
button.