Advertisement
Table of Contents
Arm
(Plastic/Steel
)
Mechanism
(Steel
)
Caster
(Plastic)
For material recycling information please refer to the Allseating End of Life Recovery
and List of Recycling Facilities, which is available at www.allseating.com
Disassembly Instructions
CPOD
Document: CAM-303
Revision: 01
Date: June 7, 2012
Back
(Plastic/Mesh)
Seat
(Foam/Plywood)
Cylinder
(Steel
)
Base
(Plastic or Aluminum)
Advertisement
Table of Contents
Related Manuals for Allseating CPOD
Summary of Contents for Allseating CPOD
- Page 1 Date: June 7, 2012 Back (Plastic/Mesh) (Plastic/Steel Seat (Foam/Plywood) Mechanism (Steel Cylinder (Steel Base (Plastic or Aluminum) Caster (Plastic) For material recycling information please refer to the Allseating End of Life Recovery and List of Recycling Facilities, which is available at www.allseating.com...
- Page 2 Document: CAM-303 Disassembly Instructions Revision: 01 CPOD Date: June 7, 2012 Tools: #2 #3 Phillips Head, Rubber Mallet or Hammer, Allen Key Skill Set: Good manual dexterity. Estimated Time: 15min per chair. Steps: 1. Armrest - 2min Turn the chair upside down, so the bottom is visible. Locate the four fasteners locate on the underside of the seat pan and unfasten.
- Page 3 Document: CAM-303 Disassembly Instructions Revision: 01 CPOD Date: June 7, 2012 7. Cylinder - 1min Remove cylinder by placing one hand on can of cylinder and hit the bottom of the mechanism with hammer until cylinder separates from mechanism. 8. Mechanism - 2min Turn the chair upside down so the bottom is visible.
Need help?
Do you have a question about the CPOD and is the answer not in the manual?
Questions and answers