Related Manuals for LG LAC-M0510R
Summary of Contents for LG LAC-M0510R
- Page 1 LAC-M0510R_ENG Car CD/MP3 Receiver OWNER’S MANUAL MODEL : LAC-M0510R Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
-
Page 2: Table Of Contents
Table of Contents Radio Operation ........14 INTRODUCTION Listening the radio stations . -
Page 3: Safety Precautions
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of electric shock, do not remove the CAUTION: cover or back of this product. There are no user-serviceable This unit employs a Laser System. parts inside. Refer servicing to qualified service personnel. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference should the unit require mainte- Warning: To reduce the risk of fire or electric shock, do not... -
Page 4: Before Use
Before Use To ensure proper use of this product, please read this owner’s Notes on Discs manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the disc by the Symbol Used in this Manual edges so that fingerprints do not get on the surface. - Page 5 Before Use Protecting your unit from theft Attaching the front panel The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. 1. Press RELEASE ( ) to open the front panel. RELEASE ( Align the left side of the panel with the stopper, and then push the right side or the panel into the unit until it clicks.
-
Page 6: Front Panel
Front Panel • VOLUME (VOL-/+) button SELECTION (SEL.) button • CONTROL UP/DOWN button AUTO STORE/PRESET SCAN (AS/PS) button EJECT (Z) button MP3 TRACK -/+10 button • CD SKIP/SEARCH ( ) button SHUFFLE (SHF) button • SEEK/TUNE ( -/+ ) button REPEAT (RPT) button CD disc slot INTRO SCAN (SCAN) button... -
Page 7: Installation
Installation Basic Installation Bend the claws according to Before installing, make sure that the ignition-switch is set to OFF and remove the thickness of the the terminal of the car battery to avoid short-circuiting. dashboard 1. Remove the existing receiver unit. 2. -
Page 8: Connections
Connections Connecting to Car Before connecting, make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits. 1 GND (BLACK) 2 PHONE (ORANGE) 3 DIMMER (PINK) DIMMER SWITCH 4 TO IGNITION (RED) IGNITION SWITCH 5 TO BATTERY. - Page 9 Connections Connecting to Car From antenna Speaker Connections To the wiring of vehicle Colors of leads 1 BLACK : This lead is for connection to the Ground. 2 ORANGE : This lead is for connection to the phone line. FRONT REAR 3 PINK : This lead is for connection to the Dimmer line...
-
Page 10: Basic Operation
Basic Operation Turning the unit on Adjusting the volume Press PWR/MUTE or any other button on the front panel. Use VOLUME to adjust the sound level. Press VOLUME (VOL+/-) button on the front panel to increase or Turning the unit off decrease the volume. -
Page 11: Sound Adjustment
Basic Operation SOUND Adjustment SELECTION (SEL) Button Using the EQ (Equalizer) 1. Press the SELECTION (SEL.) button repeatedly to select the The equalizer lets you adjust the equalization to match the acoustic characteristics of the car’s interior as desired. mode you want to adjust from volume, bass, treble, balance There are 3 stored equalizer curves which you can easily recall at and fader. -
Page 12: Rds Operation
RDS Operation RDS Display Options PROGRAM TYPE FUNCTION To select a certain program type out of the reception band, In normal RDS operation the display will indicate the station following procedure can be operated. name. Pressing DISP on the front panel enables you to cycle through the various data types in the sequence: 1. -
Page 13: Rds Mode Adjustment
RDS Operation RDS MODE Adjustment TA SEEK mode When the newly tuned station does not receive TP information for 1. Press the SEL. button for more than 2 seconds it is activated 5 sec, the receiver retunes to next station selecting mode. -
Page 14: Radio Operation
Radio Operation Listening the radio stations NOTES • The presetting is not performed if there is no station to be tuned in. 1. Press PWR/MUTE button to turn the unit on. • When the automatic presetting is performed, the previous preset stations are automatically erased. -
Page 15: Operation With Audio Cd, Mp3
Operation with Audio CD, MP3 Disc Playing an Audio CD and MP3 Disc Pause 1. Press PLAY/PAUSE (B B /X) during playback. 2. To return to playback, press PLAY/PAUSE (B B /X) again. The unit can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs. - Page 16 Operation with Audio CD, MP3 Disc MP3 TRACK -10/+10 Repeat Durning playback, press the -10 button to go back to the previous 1. Press RPT during playback. 10th track, and press +10 button to go forward to the next 10th The “RPT”...
-
Page 17: Troubleshooting
Troubleshooting Symptom Correction Cause Power doesn’t turn on. Confirm once more that all connections are correct. Leads and connector are incorrectly connected. The unit doesn’t Rectify the reason for the fuse blowing, then replace The fuse is blown. operate. the fuse. Be very sure to install the correct fuse with the same rate. - Page 18 Specifications MP3 Disc compatibility with this unit is limited as General Output Power ......50W x 4CH(Max.) follows: Power Source .
Need help?
Do you have a question about the LAC-M0510R and is the answer not in the manual?
Questions and answers