Napa Carlyle Tools 6-755A Instruction Manual page 2

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
THIS INSTRUCTION
CONTAINS IMPORTANT SAFETY
INFORMATION.
READ THIS INSTRUCTION
CAREFULLY AND UNDERSTAND
INFORMATION BEFORE OPERATING THIS
TOOL.
• Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire, explosion
and/or serious personal injury. It is the
responsibility of the owner to make sure all
personnel read this manual prior to using
the device. It is also the responsibility of the
device owner to keep this manual intact and in
a convenient location for all to see and read.
If the manual or product labels are lost or not
legible, contact NAPA for replacements. If the
operator is not fluent in English, the product
and safety instructions shall be read and
discussed with the operator in the operator's
native language by the purchaser/owner or
his designee, making sure that the operator
comprehends its contents.
• Always operate, inspect and maintain
this tool in accordance with American
National Standards Institute Safety Code of
Portable Air Tools (ANSI B186.1) and any
other applicable safety
regulations.
• For safety, top performance and
maximum durability of parts,
operate this tool at 90 psig; 6.2|
bar max air pressure with 3/8"
diameter air supply hose.
• Always wear impact-resistant
eye, face & hand protection when
operating or
maintenance on this tool (users
and bystanders).
• High sound levels can cause
permanent hearing loss. Always
use hearing
recommended by your employer
an OSHA regulations while using
this tool (users and bystanders).
• Keep the tool in efficient operating
condition.
• Operators and maintenance personnel
must be physically able to handle the bulk,
weight and power of this tool.
• Air under pressure can cause
severe injury. Never direct air
at yourself or others. Always turn
off the air supply, drain hose of
air pressure and detach tool
from air supply before installing,
removing or
accessory on this tool, or before
performing any maintenance on
this tool. Failure to do so could
result in injury. Whip hoses can cause serious
injury. Always check for damaged, frayed
or loose hoses and fittings, and replace
immediately. Do not use quick detach
6-755A
MANUAL couplings at tool. See instructions for correct
set-up.
• Keep tool out of reach of children.
MANUAL
ALL
extended periods of time may be harmful to
your hands and arms. Discontinue use of tool if
discomfort, tingling feeling or pain occurs. Seek
medical advice before resuming use.
or death. Be aware of excess hose left on the
walking or work surface.
• Keep body working stance balanced and firm.
Do not overreach when operating the tool.
• Note direction of rotation BEFORE operating
This tool.
• Anticipate and be alert for sudden changes
in motion during start up and operation of any
power tool.
codes and
can occur if hair is not kept away from tool and
accessories. Choking can occur if neckwear is
performing
not kept away from tool and accessories.
• Do not use (or modify) the tool for any other
purpose than that for which it was designed
without
authorized representative.
protection as
• Correct bonded abrasive mounted point
grinding wheels, rotary files and carbide burrs
are necessary to prevent injury from broken
accessories. Do not use chipped or cracked
bonded abrasive mounted point grinding
wheels, rotary files and carbide burrs. Tighten
the bonded abrasive mounted point grinding
wheels, rotary files and carbide burrs on the
collet to prevent spin off when the Die Grinder
is turned off.
RPM RPM RPM
• Never mount a grinding wheel, cut-off
wheel, router cutter or drill bit on a Die
adjusting any
Grinder.
• Never use an arbor, mandrel or any other
adaptor to convert the Die Grinder for any
other application.
• Use
by NAPA Tools.
WARNING
• Air powered tools can vibrate in use.
Vibration, repetitive motions or
uncomfortable positions
• Slipping, tripping and/or falling
while operating air tools can be
a major cause of serious injury
• Do not carry tool by the hose.
Protect the hose from sharp objects
and heat.
• Tool shaft may continue to rotate
briefly after throttle isreleased.
Avoid direct contact
accessories during and after use.
Gloves will reduce the risk of cuts or
burns.
• Keep away from rotating end of tool.
Do not wear jewelry or loose
clothing. Secure long hair. Scalping
consulting the manufacturer's
• RPM of the accessory must
exceed tool rpm. Use accessories
rated at 18,000 rpm or higher.
accessories recommended
2
• Do not lu bri cate tools with
flam ma ble or vol a tile liq uids such
as ker o sene, die sel or jet fuel.
• This tool is not insulated against
electric shock.
over • This tool must not be used in
explosive atmospheres.
• Servicing and repairs should only
be made by an authorized service
center.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace
damaged labels.
• Do not lock, tape or wire the "on/off"
safety lever in the "on" position, as the
lever must be free to return to the "off"
position when released.
• Failure to heed these warnings may reusult
in personal injury and/or property damage.
WARNING:
expose you to chemicals including
nickel which is known to the State of
California to cause cancer and birth defects or
other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
with
This product can
Rev. 09/09/19