Craftsman 154.37297 Operator's Manual page 11

WARNING
Make sure no one other than the operator is standing near the lawn mower
while starting engine or operating mower. Never run engine indoors or in
enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an
odorless and deadly gas. Keep hands, feet, hair and loose clothing away from
any moving parts on engine and lawn mower.
FUEL and OIL
See the engine Operator's Manual for fuel and oil instructions.
TO START ENGINE
1. Push the primer three times (Figure 8). Do not prime to restart a warm engine.
NOTE:
2. Standing behind the mower, pull the blade control handle back against the
upper handle (Figure 8).
3. While holding the blade control against the upper handle, grasp the recoil starter
handle and pull rope out with a rapid, continuous, full arm stroke (Figure 8).
until engine starts. Let the rope rewind each time slowly.
WARNING
cord (kickback). Rapid retraction can pull hand and arm toward engine faster
than you can let go, and result in broken bones, fractures, bruises or sprains.
TO STOP ENGINE
1. Release the blade control to stop the engine and blade.
WARNING
Wait for the blade to stop completely before performing any work on the mower.
USING YOUR LAWN MOWER
Be sure lawn is clear of stones, sticks, wire, or other objects which could damage
lawn mower or engine. Such objects could be accidently thrown by the mower in
any direction and cause serious personal injury to the operator and others.
WARNING
The operation of any lawn mower can result in foreign objects being thrown into
the eyes, which can damage your eyes severely. Always wear safety glasses while
operating the mower, or while performing any adjustments or repairs on it.
WARNING
If you strike a foreign object, stop the engine. Disconnect the spark plug wire,
thoroughly inspect mower for any damage, and repair damage before restarting
and operating. Extensive vibration of mower during operation is an indication
of damage. The unit should be promptly inspected and repaired. Refer to the
Engine Manual.
OPERATION
3
11
2
Figure 8
1