Page 1
*Image may not represent the product you purchased CONGRATULATIONS ON YOUR PURCHASE OF A REVERIE POWER BASE! Follow the steps listed below to operate your Reverie power base using the remote provided and/or the Reverie Nightstand™ app. Step 1: Download the Reverie Nightstand app from the App store for any of your Apple devices, or from the Google Play store for any Android devices.
OR WEARING MEDICAL DEVICES. FOR working properly, dropped or damaged, HOUSEHOLD / RESIDENTIAL USE ONLY. DO or dropped into the water, call Reverie PRODUCT RATINGS NOT USE OUTDOORS. This product conforms customer service.
Frame Assembly Instructions STEP 4 STEP 7A IMPORTANT UNPACKING INSTRUCTIONS If you have a tool free retainer bar, To avoid damage to the power Carefully flip the power base over with Insert it into the two mount holes base, always open the carton 2 people, to the topside-up position.
Law Tags attached to the base. STEP 2 Locate and remove the cover for the ® Manufactured by Reverie 9 volt batteries on the control box or Ensure the power base is plugged For Warranty and Service: power supply box.
Remote Control Operation Guide HEAD AND FOOT ADJUSTMENTS (A,C) Adjusts the head and foot sections to the desired positions. A. RAISE & LOWER HEAD SECTION FLAT (B) Returns both head and foot to the B. RETURN TO FLAT flat position. C.
Page 6
TANDEM FEATURE If you want 2 sides to move in sync when using one remote (recommended for Split King/Cal King units) you can pair to both sides using the Tandem Feature. You can also pair two remotes to two sides, so that either remote can control both sides at the same time.
Page 7
APP STORE. Comfort Settings, Routines, STEP 2 Memory Positions, Alarms • The Dashboard and each Preset Section is customizable to display Type “Reverie Nightstand” in the your favorite and most used search column. settings. • Expandable Toolbar gives access STEP 3...
Page 8
Shows nearby beds that you can connect to in order of proximity. • Reverie Connect - If your base is compatible with our Reverie Connect technology you can follow the setup to control your base with 9 voice activated commands •...
Page 9
Nightlight, Home Tab, Position Tab, Use your Android mobile device to Massage Tab, and Alarm Tab. log into the GOOGLE PLAY STORE. • Reverie Presets - Zero Gravity, Anti-Snore, and Flat are right at your STEP 2 fingertips. • Comfort Setting - Press “New +” to Type “Reverie Nightstand”...
Page 10
• Help - Contact info for technical support. • Mattress Configurator - Reconfigure your Reverie Dream Supreme mattress with these firmness guides. • Factory Reset - Reset your app to original settings. •...
Headboard Bracket Assembly PARTS LIST STEP 5 STEP 2 A. Leg Clamp Brackets (2) Bolt the Leg Clamp Bracket (A) to the Lower the head section of your B. Inner Headboard Brackets (2) leg using 2 Headboard Bolts (D), and 2 power base and check that there C.
Troubleshooting In the event the Power Base fails to operate, investigate the symptoms and possible solutions provided in the chart below: SYMPTOM SOLUTION • Make sure your remote is paired or plugged into the bed. • Your electrical circuit breaker may be tripped. •...
Page 13
Please call Customer Service. • Either your phone is connected to the bed via the Reverie Nightstand app or another remote is Remote states other remote connected. connected. Disconnect from bluetooth in the app and make sure the other remote is asleep.
The decision to repair or to replace defective Power Bases ONLY parts under this Limited Warranty shall be made exclusively by Reverie in its sole and Ascion, L.L.C. d/b/a Reverie (hereinafter Upon receiving reasonable written notice at exclusive discretion. referred to as “Reverie”) warrants to the end any point in time that is more than five (5) user (hereinafter referred to as “Purchaser”)
Need help?
Do you have a question about the 3EM and is the answer not in the manual?
Questions and answers