Page 2
This detector has been designed with the latest technology to allow you to make the most of your passion, to discover the remains of the past. Ultima is a continuation and development of our previous detectors which have gained popularity among the searchers.
(see picture beside). The circuit monitoring the battery level shows a charging level of 1.5 V for standard alkaline batteries. When using 1.2 V rechargeable batteries the battery charge icon will never be full. RUTUS Ultima...
– decreasing from 5 to 1 and after the last movement up the message « Detector ready, press PP » will be shown. After pressing the button, the soil phase reading will be gathered and after about 2 seconds the detector will be ready for searching. RUTUS Ultima...
15 m away from other detectors. Not following these guidelines will not damage the detector, but it will cause the detector to operate less accurately – a proper ground balance procedure will fix this quickly. The picture below shows the display in the operation mode. RUTUS Ultima...
Ultima is a detector which has a built-in metal object identification circuit. The detector has 120 identification points which can be set within the range 1 to 120. It analyses the signal from a metal object several hundred times per second, after each identification process, the internal memory of the device saves a specific digital value.
When the graph is clearly bent, curved or spread across the whole of the display, it is highly probable that you are dealing with an object such as a can, a thin steel sheet or other steel object whose magnetic properties are lesser than its conductive properties. RUTUS Ultima...
Sensitivity in the Ultima detector may be adjusted across 75 levels. The Sensitivity level set by the user determines the detector's range and more importantly it's stable operation. In areas which are littered, freshly ploughed or have heavy electromagnetic interference, operating with maximum Sensitivity is not possible.
Discrimination is a function which enables the removal of sound signals from unwanted objects, which have a identification number lower than the set discrimination value. In the Ultima detector, the discrimination function works differently depending on the mode of operation. In...
In the pictures are the factory value for each of settings. Main settings can not be reset back to the factory settings. MAIN MOTION MODE NON-MOTION MODE DUAL MODE SETTINGS SETTINGS SETTINGS SETTINGS RUTUS Ultima...
1 and 120 are connected, and therefore an object identified as above 1 is automatically identified as a high value object and vice versa. RUTUS Ultima...
Wireless Ultima has a built-in wireless digital data transmitter which can work on one of two available radio frequencies. The design of the digital connection was made especially for our detectors – therefore there is no lag or background noise. The use of the accompanying wireless devices is detailed in their respective user’s manuals.
Once all the required sounds have been determined from the edit screen, exit with a press the button. This program is common to Motion and Dual mode work. RUTUS Ultima...
The Th SAT function reduces the effects of external conditions on the operation of the All metal channel of the detector. To put it simply: by using this setting we can prevent the detector mistuning in the sun. Another important function of SAT is changing the response of the All metal channel. RUTUS Ultima...
They have the same meaning and action. In the Dual mode, the Audio gain is not set – this parameter is held steady at the optimum level. To understand how Ultima works and it's potential, the device’s flow chart below will help: RUTUS Ultima...
Ultima consists of several basic functional blocks: a transmitter, a search coil, a Motion channel, an All metal channel, a sound control circuit and parts used to communicate with a user: a display and a speaker. The transmitter controls the transmitting coil in the search coil and the user may choose between one of two frequencies: 8 kHz or 16 kHz.
How long this takes will depend on the SAT value: if SAT is set to 1 then this will be 1 second, if SAT is set to 20 – it will be approximately 0.7 seconds. RUTUS Ultima...
Page 19
As your knowledge of the particular characteristics of this detector increases it will become easier to choose the best mode for each terrain and searching task. RUTUS Ultima...
This will allow you to listen more closely to detector’s weakest signals, increasing the technical capabilities, especially in All metal modes, where the sounds are more subtle. When searching for the deepest objects, headphones should be an essential part of your equipment. RUTUS Ultima...
In difficult weather conditions it is advised to use a cover for the control panel and the battery compartment. Correct maintenance of the detector will increase its reliability and longevity. RUTUS Ultima...
EU DECLARATION OF CONFORMITY Manufacturer: RUTUS Arkadiusz Rutyna, ul. Krakowska 32, 84-230 Rumia, Poland Product: Metal detector Ultima The manufacturer hereby states that this product is in accordance with the requirement of Directive 2014/30/UE on the harmonization of the laws of the Member States relating...
Need help?
Do you have a question about the Ultima and is the answer not in the manual?
Questions and answers