Limiting the opening angle of
the appliance door
The door hinges are set ex works to en-
able the appliance door to be opened
wide.
However if the opening angle of the ap-
pliance door needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If the appliance door hits an adjacent
wall when opened, for example, the
opening angle can be limited to approx.
90°:
The locking pins for limiting the door
opening must be fitted before the refri-
geration appliance is installed.
Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approx. 90°.
Changing the door hinging
Two people are needed for changing
the door hinging.
The appliance is supplied right-hand
hinged. If left-hand hinging is required,
the hinges must be changed.
To change the door hinging, you will
need the following tools:
Open the appliance door.
Remove the shelves/bottle shelf from
the appliance door.
Lift off covers , and .
Installation
53