Advertisement

IMAC 4000
GAS
US
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IMAC 4000 GAS US and is the answer not in the manual?

Questions and answers

Summary of Contents for THERMOBILE IMAC 4000 GAS US

  • Page 1 IMAC 4000 USER MANUAL...
  • Page 2 40.020.950 - rev. 01 - 2019 IMAC 4000 US...
  • Page 3 IMAC 4000 US 40.020.950 - rev. 01 - 2019...
  • Page 4 Language English...........5 40.020.950 - rev. 01 - 2019 IMAC 4000 US...
  • Page 5: Table Of Contents

    For warranty and liability, see general warranty regulations. Lifting instructions (Fig. 2) A Lifting hooks B Shafts for lifting using a fork-lift truck Warning Do not use any unsuitable material for lifting the convector heater. IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 6: Introduction

    - 1: Fan low speed - 2: Fan high speed - 3: Fan low speed; burner low - 4: Fan high speed; burner low - 5: Fan high speed; burner high 40.021.119 - rev. 00 - 2019 IMAC 4000 GAS US...
  • Page 7: Preparations

    Air-supply hose (diameter 500 or 600 mm) • Air-inlet panels (diameter 500 or 600 mm) • Hot air outlets (diameter 2 x 600 mm or 3 x • 500 mm) IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 8: Use

    See fig. 5. The fan will start up. thermostat connection. 4. Remove the air hoses. 5. Remove the flue. 6. Remove the fuel connection. 40.021.119 - rev. 00 - 2019 IMAC 4000 GAS US...
  • Page 9: Maintenance

    Caution damage to the burner room. Tension the V-belts according to the 3. Close the valve of the fuel supply. table. 4. Disconnect the power plug. IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 10: Faults

    There is not enough fuel. Adjust the gas appliance Dealer up, but no flame is regulator. forming. The main filter is clogged. Clean or replace the filter. User 40.021.119 - rev. 00 - 2019 IMAC 4000 GAS US...
  • Page 11 Dealer heater burns been set correctly. according to the manufacturer’s intermittently. specifications. The burner is The air inlet has not been Set the air inlet. Dealer producing soot. correctly set. IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 12: Spare Parts

    See for technical specifications table C in the flue should be at least 1000 mm. appendix of this manual. 2. Place a rain cover (A) on the end of the flue. 40.021.119 - rev. 00 - 2019 IMAC 4000 GAS US...
  • Page 13 Two-way outlet IMAC 4000 Diameter 600 mm 9.5 Diameters of air-inlet hoses Inlet IMAC 4000 Diameter 500 or 600 mm 9.6 Room thermostat Refer to the instructions of the thermostat. IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 14 English Date Description: Maintenance or Failure Action by 40.021.119 - rev. 00 - 2019 IMAC 4000 GAS US...
  • Page 15 English Date Description: Maintenance or Failure Action by IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 16 Fan thermostat °C °F Burner thermostat °C °F Maximal thermostat °C °F Power 3 phase 230 V Frequency Burner Riello RS 38/M Length 12.63 Width 3.94 Height 6.61 Weight 1300 2866 40.021.119 - rev. 00 - 2019 IMAC 4000 GAS US...
  • Page 17 English IMAC 4000 GAS US 40.021.119 - rev. 00 - 2019...
  • Page 18 40.020.950 - rev. 01 - 2019 IMAC 4000 US...
  • Page 19 © 2013 Thermobile Industries B.V. All rights reserved. The available information has been prepared to a high level of care, but Thermobile Industries B.V. cannot be held liable for possible errors in the information or the consequences thereof. The information provided herein may not be reproduced and/or published in any form, by print,...
  • Page 20 THERMOBILE INDUSTRIES BV Konijnenberg 80 4825 BD Breda Nederland Postbus 3312 4800 DH Breda Nederland Bedrijfsnummer: 3502 T +31 (0)76 587 34 50 F +31 (0)76 587 27 89 info@thermobile.com www.thermobile.com 40.021.119 - REV. 00 - 2019...

Table of Contents