English 7.2 V HEAVY-DUTY CORDLESS SCREWDRIVER DCF680, DCF682 Congratulations! Battery pack DCB080 You have chosen a D WALT tool. Years of experience, thorough Battery Type Li-Ion product development and innovation make D WALT one of the Voltage most reliable partners for professional power tool users.
Page 6
Weight English CAUTION: Indicates a potentially hazardous situation 3) Personal Safety which, if not avoided, may result in minor or a ) Stay alert, watch what you are doing and use moderate injury. common sense when operating a power tool. Do not NOTICE: Indicates a practice not related to use a power tool while you are tired or under the influence of drugs, alcohol or medication.
English Additional Safety Instructions for Cordless power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by Screwdrivers poorly maintained power tools. Wear ear protectors with screwdrivers. Exposure to noise • f ) Keep cutting tools sharp and clean. Properly can cause hearing loss.
English Important Safety Instructions for All Battery reassembly may result in a risk of electric shock, electrocution or fire. Chargers • In case of damaged power supply cord the supply cord must be SAVE THESE INSTRUCTIONS: This manual contains important replaced immediately by the manufacturer, its service agent or safety and operating instructions for compatible battery similar qualified person to prevent any hazard.
English pack charging mode. This feature ensures maximum battery Do not store or use the tool and battery pack in • pack life. locations where the temperature may reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or metal buildings A cold battery pack will charge at a slower rate than a warm in summer).
Battery Type The information provided in this section of the manual is The DCF680 and DCF682 operate on a 7.2 volt battery pack. provided in good faith and believed to be accurate at the time These battery packs may be used: DCB080. Refer to Technical the document was created.
The fuel gauge is only an indication of the charge left on the battery pack. It does not indicate tool functionality and is Chuck collar subject to variation based on product components, temperature Torque adjustment collar (DCF680 Only) and end-user application. Release button (DCF680 Only) Quick Release Chuck (Fig. A, D) Intended Use nOTE: The chuck accepts 6.35 mm hex accessories only.
Your D WALT power tool has been designed to operate DCF680 over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool Proper hand position requires one hand on the main handle as care and regular cleaning.
English Rechargeable Battery Pack This long life battery pack must be replaced when it fails to produce sufficient power on jobs which were easily done before. At the end of its technical life, discard it with due care for our environment: •...
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)
Need help?
Do you have a question about the DCF680 and is the answer not in the manual?
Questions and answers