Attaching The Front Panel - Miele DA 3466 Operating And Installation Instructions

 Align the housing and screw on the
retaining brackets.
 Secure the spacer strip to the back of
the appliance from behind using 4
plastic rivets as shown.

Attaching the front panel

The front of the deflector plate can be
fitted with a front panel to match
existing kitchen furniture units.
The weight of the front panel must not
exceed 1300 g. This applies to front
panels with a depth of up to 30 mm. For
larger and heavier front panels, the
weight must be reduced, e.g. by
machining it away at the back.
A DML 400 installation kit is required for
fitting a front panel. It is available as an
optional accessory.
 Follow the installation instructions
supplied.
Installation
35