Performing A Self Test; Switching On Door Assistant - Miele KWT 2601 SF Operating And Installation Instructions

Wine conditioning unit
Table of Contents

Advertisement

Performing a Self Test 
Perform a
Self Test
that your wine conditioning unit is not
working properly and want to check if it
is suffering from any problems.
 In settings mode , use the  and 
arrow buttons to select
select OK to confirm your selection.
 Touch the sensor control  if you
wish to terminate the process.
The
starts and the wine condi-
Self Test
tioning unit is checked for any faults or
malfunctions.
– The message
pears in the display if the Self Test
does not discover any faults or mal-
functions.
– If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages in the dis-
play.
An alarm also sounds.
 If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the sensor control .
 Make a note of the error message(s)
displayed.
 Contact Technical Service and inform
them of the error message(s) on the
display.
 Confirm the message with OK.
System Restarting
The appliance briefly switches off and
then back on automatically.
Self test completed
play.
if you are concerned
Self Test
System Restarting
appears in the display.
appears in the dis-
Selecting additional settings
 Confirm the message with OK.
The main screen appears on the display
again.
Switching on Door Assistant 
You can choose between the two Door
Assistants
and
The default Door Assistant is
Push2Open
The
Push2Open
able for cabinet fronts without handles.
The door will then open automatically
when you gently press against it.
The
Pull2Open
ap-
for cabinet fronts with handles. The ap-
pliance door can be opened easily with
little force.
When the Door Assistant is switched
on, repeatedly closing the appliance
door early can lead to damage or
malfunctions.
Refrain from holding onto or closing
the appliance door while automatic
door opening is still extended. If you
have indeed closed the appliance
door, leave it closed for 5 minutes.
Automatic door opening resets itself.
Switching on Push2Open
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
 Use the  and  arrow buttons to
select
your selection.
 Use the  and  arrow buttons to
select
confirm your selection.
and
Push2Open
.
Door Assistant is suit-
Door Assistant is suitable
and touch OK to confirm
Mode
Push2Open
and touch OK to
.
Pull2Open
Door Assistant
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kwt 2611 sf

Table of Contents