Table of Contents
Advertisement
Securing the toe-kick board
and cover
Click the toe-kick board onto the
bottom of the appliance toe-kick.
Do not cover the vents in the appli-
ance toe-kick. This will damage the
appliance!
If necessary, cut the toe-kick cover to
the required length and height (cut
along the lower edge of the toe-kick
facing where it touches the floor).
Attach the toe-kick cover to the bot-
tom of the appliance.
Building in the appliance
Aligning the Ice/Water dis-
penser frame
If necessary, the depth of the Ice/Water
dispenser can be aligned to line up with
the cabinet front.
Unplug the appliance or switch off
the breaker.
Insert a screwdriver from the side to
remove the rear cover from the Ice/
Water dispenser.
Use a wrench to loosen the three nuts
on the Ice/Water dispenser slightly
(turn the nuts counterclockwise).
47
Advertisement
Table of Contents
