Related Manuals for Leader Fox Kent
Summary of Contents for Leader Fox Kent
- Page 1 Electric Bicycle Operating Instructions Under the law, the dealer is obliged to attach the LEADER FOX Electric Bicycle Operating Instructions to every product E – BIKE POWER RIDE Kent...
- Page 3 Introduction Dear users, Please read carefully all the information regarding your E-LF product to ensure optimal functioning of your e-bike. The following text containing a comprehensive description will provide you with information on all aspects and details (including installation, setting up and general use of the display) regarding the use of our display.
- Page 4 Factors influencing the electric bicycle range 1. Rolling resistance of the tyres. Leader Fox e-bikes are fittet with tyres with low rolling resistance and increased resistance to puncture. It is also important that the tyres are inflated properly. Therefor, if the tyres of your electric bicycle are underinflated, the range will decrease.
- Page 5 Electric set M500 The system uses monitoring of torque, monitoring of speed of the pedal assist system and monitoring of real speed of wheels. The system uses a dual protection feedback for measuring the speed signal to ensure safety and reliabilityof the system.
- Page 6 Dimensions of the power unit:...
-
Page 7: Safety Instruction
Safety instruction Battery: Do not throw the battery into fire. Do not throw the battery into water. Do not use the battery for other appliances. It has been made specifically for this model. Do not dismantle or modify the battery. Do not connect the positive and negative poles of the battery. - Page 8 Battery Battery charging and maintenance: Charge the battery in a dry enviroment to avoid short-circuit damage. Charge the battery to at least 60% of the capacity once every 3 months even when the bicycle is not used. Do not cover the battery or the charger. Do not leave the battery constantly connected to the power source.
- Page 9 If the charge indicator shows that the battery is discharged, there is still a minimum voltage level in it which protects it against damage but is not enough to power the electric bicycle. Recharge the battery as soon as possible. Never leave the battery fully discharged, it could results in its damage. In the case, that the battery will be turned on more than 30 min and bike will not be used, the battery will be automatically switched off.
-
Page 10: Lcd Display
LCD display Product: Intelligent display DP C240.CAN Supplier: Bafang Electrical parameters: Battery supply 36V Rated operating current 12mA Off leakage current < 1 uA CAN BUS protocol Maxoutput current 30mA Maxoutput current to controller 50mA Operating temperature –20 ~ 45 °C Storage temperature –30 ~ 70 °C LCD dimensions and materials: Prodcut shell is ABS, transparent window is made withhigh strength Acrylic. - Page 11 LCD Display description: Threebutton console which is with BOOST mode is more user-friendly. Speed indication: Includes maximum speed, average speed. Unit switch between imperial and metric. Intelligent battery capacity indication. Control and indication for the headlight. 5 levels of backlight brightness setting. Indication for power assistance level with 6 levels:0/1/2/3/4/5.
- Page 12 Assembly instructions Display assembly: Please pay attention to the tightening torque of screws. Damage caused by excessive tightening torque or incorrect assembly / disassembly is not covered by warranty. Down Boost / On-Off...
- Page 13 Control Turning on the electrical system of the e-bike Before switch on of the system please check electrical wiring. Switch on power of the electrical system on battery, colored backlighting illuminates. Switch on display with press and short hold (1,5 second) ON/OFF button. Display will automatically turns off if it is not used for a while.
- Page 14 Speed and mileage mode switch Briefly press ”BOOST” button to switch to different data interfaces,then circularly to show single trip distance (Trip,km) → total distance (ODO,km) → maximum speed (MAX,km/h) → average speed (AVG,km/h) → remaining distance (RANGE,km) → energy consumption (CALORIES/CAL,KCal) → riding time (TIME,min) → real-time output power (POWER,w).
- Page 15 BOOST mode: While riding and speed reaching to 25km/h, press and hold “ BOOST” button with 2 seconds to activate, then motor will give 100% output power and flowing without pedaling, it feels more like a constant strong push in the back;...
- Page 16 Brightness setting Briefly press “+” or “-” to go to “Brightness”, and then briefly press ”ON/OFF” to select am ong“100%”/“75%”/“50%”/“30%”/“10%” five levels, then briefly press ”ON/OFF” to confirm selection and save the setting and exit back to the “Brightness”. Press and hold “+” and “-” synchronously to save and exit back to the main interface, or you can also select “BACK”...
- Page 17 Trip reset - to clear the single trip distance Briefly press “+” or “-” to go to “TRIP Reset”, and then briefly press ”ON/OFF” to switch between NO”/“YES” (“YES”- to clear, “NO”no operation), then briefly press ”ON/OFF” to confirm selection; After confirmation, briefly press ”ON/OFF”...
- Page 18 Bttery status information Auto Off: Press UP/DOWN button to change the auto power off time, from 1 to 10 the number represent time (minutes) to shutdown, default value is 5 minutes. | | | | System Info: System status...
- Page 19 Reset: For choosing Yes/No use Up/Down buttons and for confirmation press M button. Yes mean the data are resets. Mazání dat / Data clearance: By long press M button for 3 seconds enter to the Data clearance. For choosing Yes/No use Up/Down buttons and for confirmation press M button.
- Page 20 Basic setting: System is factory set. For changing these parameters contact your dealer or producer. Do not change these parameters by yourself, you can damage the e-bike. Damaged caused by improper treatment is not within the scope of the warranty.
-
Page 21: Maintenance
Maintenance Regular maintenance: - maintain all components of the electric bicycle clean - use only the recommended and tested cleaning materials - regularly lubricate the chain with suitable oils - in winter, clean the electric bicycle after each ride and pay increased attention to removing salt from battery contacts and other connectors - while handling the electric bicycle, make sure the cables of the electric system are not damaged. -
Page 22: Possible Problems And Their Solutions
Possible problems and their solutions In case of system failure perform its diagnostics or contact your dealer. The control LCD display is not on: - always make sure the battery is charged - check whether the battery is inserted correctly, whether the battery switch is on - check the connections of the control unit and the display The motor does not start when the walk assistance button is pressed - check the connection of the motor cable (at the motor and the control unit) - Page 23 Warning When there is a problem with the electric bicycle, it can show error messages. LCD display will show the icon and an error code will be displayed on the speed display. Error codes are marked from 01 E~FF E; see their meaning in the table below.
- Page 24 Electric set warranty Complaint procedure: Submit any complaints concerning the electric set or the battery to your dealer. When filing a complaint, submit a proof of purchase and a warranty certificate with the registered serial number of the battery and indicate the reason for the complaint and a description of the defect. Wrranty conditions: 24 months for electric bicycle components –...
- Page 25 Warning If you do not understand any of the points in these Operating Instructions, please contact the dealer for explanation. Please read the whole manual! Do not lend the e-bike to persons not briefed in its use and operation. Complaints resulting from improper handling will not be accepted.
- Page 26 Enjoy many pleasant and safe kilometres on your new electric bicycle. Your Leader Fox Team Czech brand of electric bicycles. BOHEMIA BIKE Address Na Pankráci 1724 14000 Praha 4 - Pankrác Development, design and manufacturing Okružní 697 České Budějovice 37001 Phone: 388 314 885 Email: info@leaderfox.cz...
Need help?
Do you have a question about the Kent and is the answer not in the manual?
Questions and answers