Huawei HG8245 series Quick Start Manual page 8

Logging in to the Web Configuration Window
Step 1 Set the IP address of the PC in the same subnet as the management IP address
of the GPON terminal. For example,
-IP address: 192.168.100.100
-Subnet mask: 255.255.255.0
NOTE
The default management IP address and subnet mask of the GPON terminal are as follows:
-IP address: 192.168.100.1
-Subnet mask: 255.255.255.0
Step 2 Enter the management IP address of the GPON terminal in the address bar of
Internet Explorer and press Enter.
The login window is displayed.
Step 3 In the login window, select your preferred language, enter the user name and
password (default user name is root and default password is admin), and
click Login. After the password is authenticated, the Web configuration window
is displayed.
Configuring Wi-Fi Parameters
Step 1 Choose the WLAN tab and choose WLAN Configuration.
Step 2 In the pane, select the Enable WLAN option box. In the dialog box that is
displayed, set the basic Wi-Fi parameters, including the SSID, authentication
mode, and encryption mode. For example,
-SSID: WirelessNet
-Authentication Mode: WPA Pre-Shared Key
-Encryption Mode: TKIP
-WPA PreSharedKey: Password
SSID indicates the name of a wireless network searched by the Wi-Fi terminal; WPA
PreSharedKey indicates the authentication password for the Wi-Fi terminal to access a
wireless network.
Step 3 Click Apply.
6