Hitachi 50UHDSM8 Owner's Manual page 43

Menus (Cont.)
Network Setup
You can set up your TV so that it can access the
Internet through your local area network (LAN) using
a wired or wireless connection.
Connecting to a Wired Network
You can attach your TV to your LAN using a cable in
three ways:
• Connect the LAN port on the back of your TV to
an external modem using a Cat 5 cable.
• Connect the LAN port on the back of your TV to
an IP Sharer which is connected to an external
modem using a Cat 5 cable.
• Depending on how your network is configured, you may be able to
connect your TV to your LAN by connecting the LAN port on the back of
your TV directly to a network wall outlet using a Cat 5 cable. Note that the
wall outlet is attached to a modem or router elsewhere in your house.
If you have a Dynamic Network, you should use an ADSL modem or router
that supports Dynamic Host Configuration Protocol (DHCP).
Modems and routers that support DHCP automatically provide the IP
address, subnet mask, gateway, and DNS values your TV needs to access the
Internet so you don't have to enter them manually.
Most home networks are Dynamic Networks. Some networks require a Static
IP address.
If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV's Cable Setup
Screen when you set up the network connection.
To get the IP address, subnet mask, gateway and DNS values, contact your
Internet Service Provider (ISP). If you have a Windows computer, you can also
get these values through your computer.
After Sales Support
Telephone:
Email:
1300 886 649
info@tempo.org
43