D-Link DP-101P+ Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Print Server
  5. DP-101P+
  6. Quick installation manual
D-Link DP-101P+ Quick Installation Manual

D-Link DP-101P+ Quick Installation Manual

Ethernet pocket size print server
Hide thumbs Also See for DP-101P+:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
This product can be set up using
any current web browser, i.e.,
Internet Explorer 5x, Netscape
Navigator 4x.

Before You Begin

You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a parallel-port printer that will connect to the DP-101P+.
Important: TURN OFF the power to the printer before installing
the DP-101P+.

Check Your Package Contents

These are the items included with your DP-101P+ purchase:
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications
subject to change without notice. DP-101P+ .08142002
DP-101P+ Pocket Size Print Server
CD-ROM (containing Manual and Warranty)
7.5V DC 1A Power Adapter
DP-101P+
D-Link Ethernet Pocket
Size Print Server
Using a power
supply with a
different voltage
rating will damage
this product and void
its warranty.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DP-101P+ and is the answer not in the manual?

Questions and answers

Related Manuals for D-Link DP-101P+

Summary of Contents for D-Link DP-101P+

  • Page 1: Before You Begin

    If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DP-101P+ .08142002...
  • Page 2 Connecting The DP-101P+ To Your Network First, insert one end of a CAT5 Ethernet RJ-45 cable into the “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the gateway or Note: Do not connect the power cord to the DP-101P+ until you are advised to do so Next, make sure that the Printer is turned OFF.
  • Page 3 Setting up your DP-101P+ for network printing in Windows XP For additional Windows operating system setup or information on the web-management interface, refer to the manual located on the CD-ROM. The factory default IP address of the DP-101P+ is 192.168.0.10. In order to print to the your printer through the DP-101P+, the DP-101P+ must have the same IP network settings as your network.
  • Page 4 Setting up your DP-101P+ for network printing in Windows XP Select “Local Printer.” Click Next Select “Create a new port.” At the pull-down menu, highlight “Standard TCP/IP Port.” Click Next Click Next (continued)
  • Page 5 Setting up your DP-101P+ for network printing in Windows XP Type in the IP address of the print server. (i.e. 192.168.0.10) The port name will automatically be filled in. Click Next Select “Standard.” Make sure that “Generic Network Card” is highlighted. Click Next Click...
  • Page 6 Setting up your DP-101P+ for network printing in Windows XP In this window, scroll down to find your printer. (If it is not listed, insert the driver CD or diskette that came with your printer.) Click on “Have Disk.” Then, scroll down and highlight the printer.
  • Page 7 Your Setup is Complete! The printer is now ready for printing with Windows XP, on your network. Click Finish Note: MacOS printing is supported for Postscript printers only.

  • Page 8: Technical Support

    Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.

Table of Contents