Auxiliary Supply - Honeywell CD3000S-3PH User Manual

User's Manual

6.1 Auxiliary supply

Warning: this procedure can be done just by specialized personnel.
To change auxiliary supply voltage sold the correct link-jumper on main PCB.
Auxiliary supply jumpers for S11, S13 and S14 sizes
230V Auxiliary supply
To set the auxiliary power
supply to 230V, close J9 and
J11 and open J10 as shown
below.
J11
J10
J9
CD3000S-3PH from 125A to 500A
J11
J10
J9
460V Auxiliary supply
To set the auxiliary power
supply to 460V, close J10
and open J9 and J11 as
shown below.
J11
J10
J9
19
600V Auxiliary supply
This is a special version on request.
In this case the unit is supplied
already configured.
J11
J10
J9
www.honeywell.com/imc
Honeywell