Table of Contents
Advertisement
Holding the installation frame
securely, remove the two fixing
screws and extend the installation
frame to its maximum length.
Replace the screws.
The directional unit from recirculation kit
DUI 32 (optional accessory) is installed
for recirculation mode (RM):
Bend the four retaining tabs on the
installation frame outward.
Place the power cord inside the
installation frame.
Fit the directional unit as shown,
noting the marking on the front.
Bend the retaining tabs back and
approx. 45° inward to hold the
directional unit in place.
Installation
49
Advertisement
Table of Contents
