Wireless Management (Mac Access And Multiple Ssid) - D-Link DSL-G604T User Manual

Wireless Management (MAC Access and Multiple SSID)

The Wireless Management menu located in the Advanced directory is used to control MAC address access to
the wireless access point and to view a list of MAC addresses that are currently associated with the access point.
This menu is also be used to enable and configure use of multiple SSIDs. To use more than one SSID, WEP and
WPA security must first be disabled (see below).
To view a list of stations currently associated with the access point, click the Associated Stations radio button.
Configure Wireless Access Control
To create a list of MAC addresses that are banned or allowed association with the wireless access point:
1. Click in the Enable Access List option box to select it.
2. Select the action to perform on the MAC address to be specified. Choose to Allow or Ban association.
3. Type in the MAC Address in the entry field provided.
4. Click the Add button to add the MAC address to the list. The AMC address will appear listed in the
table below.
5. After compiling the list of MAC addresses as desired, click the Apply button to enforce access control
for the MAC addresses in the list.
To remove any MAC address from the list, click the radio button in the left column of the list for the MAC
address to be removed and click the Apply button.
Figure 4- 12. Wireless Management Access List