Table of Contents
Advertisement
■
When connecting with [Manual Input]
• When connecting by [Manual Input], confirm SSID, network authentication type,
encryption type, encryption key of the wireless access point you are using.
On the screen of step
by [From List])", select [Manual Input]
Enter the SSID of the wireless access point you are connecting to, then select [Set]
• For details on how to enter characters, refer to "Entering Text"
Select the network authentication type
[WPA2-PSK]
[WPA2/WPA-PSK]
[No Encryption]
(When an option other than [No Encryption] is selected)
Enter the encryption key
●
Check the wireless access points instruction manual and settings when saving a wireless access
point.
●
If no connection can be established, the wireless access point's radio waves may be too weak.
Refer to "Message displays"
●
Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
263
1
of "If you are not sure about the WPS compatibility (connecting
Supported encryption methods: [TKIP] / [AES]
(→291)
and "Q&A Troubleshooting"
Wi-Fi/Bluetooth
About Wi-Fi connections
(→51)
—
(→297)
for details.
Advertisement
Table of Contents
Need help?
Do you have a question about the Lumix DC-ZS200 and is the answer not in the manual?
Questions and answers
a take a photo with the dial set at P, push shutter and screen says "recording in Post focus" what does that mean? All I want is a single frame, not a movie.
On the Panasonic Lumix DC-ZS200, "recording in Post Focus" means the camera captures multiple images at different focus points when the shutter is pressed. You can then select and save the desired focus point later during playback. This feature is available when the mode dial is set to P (Program) and [Post Focus] is selected in the drive mode.
This answer is automatically generated