Features And Controls - Craftsman 580.326300 Owner's Manual

KNOW YOUR GENERATOR
Read the owner's manual and safety rules before operating your generator.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Fuel Tank
(2) 120 Volt AC,
20 Amp Duplex
Receptacles
120/240 Volt AC,
30 Amp Receptacle
120 Volt AC, 20 Amp, Duplex Receptacles — May
be used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle —
May be used to supply electrical power for the
operation of 120 and/or 240 Volt AC, 30 Amp, single
phase, 60 Hz electrical, lighting, appliance, tool and
motor loads.
Air Cleaner — Filters intake air as it is drawn into the
engine.
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Push to reset circuit
breakers are provided to protect the generator against
electrical overload.

FEATURES AND CONTROLS

Fuel Valve
(not shown)
Circuit
Breakers (AC)
Fuel Tank — Capacity of seven (7) U.S. gallons.
Fuel Valve — Used to turn fuel on and off to engine.
Grounding Fastener — If required, please consult a
qualified electrician, electrical inspector, or local
agency having jurisdiction.
Oil Fill — Add engine oil here.
Recoil Starter — Used to start the engine.
Rocker Switch — Set this switch to "On" before using
recoil starter. Set switch to "Off" to switch off engine.
Spark Arrester Muffler — Exhaust muffler lowers
engine noise and is equipped with a spark arrester
screen.
5
Rocker Switch
(on engine shroud)
Recoil Starter
(not shown)
Choke
Lever
Air Cleaner
Oil Fill
Spark Arrester Muffler
Grounding Fastener