RecoRDing AnD PLAyBAcK (in DigitAL tV MoDe onLy)
changing the Attribute
1
Select a programme and press the yeLLoW button to change the attribute
of the recorded programme. A pop-up will appear.
2
Select File and press the oK button.
● Programme: Change the programme name using the
keyboard.
● Protect: Enable – Disable
● Lock: Enable – Disable
3
Select Save and press the oK button to complete.
4
Select cancel and press the oK button to cancel.
note:
▪
You have to enter a PIN code to change the status from enable to Disable.
▪
If the protect option of the programme is set to enable, you cannot delete the programme.
▪
If the lock option of a programme is configured to enable, you have to enter a PIN code to playback the programme.
HDD control
You can check the free space of the connected hard disk drive and
format (erase) the disk drive if necessary.
1
Select DtV Setup > Record > HDD control.
2
You can check the free, used, reserved and total space of the
HDD.
3
Select Format and to remove all the recorded programmes
saved on the HDD and initialize the HDD.
4
Select yes when the format confirmation message appears and
enter a PIN code to start formatting the HDD.
note:
▪
The format deletes all the recorded programmes saved in the HDD, not the system files of the TV. A certain amount of
space is reserved for TSR.
▪
The default PIN code is 0000. If you have forgotten the PIN code, please contact your local TV distributor.
Recording's Start/end time
You can set the start/end time of recording.
Select DtV Setup > Record > Recording's Start/end time.
Select the time using the ▲/▼ button and press the oK button.
note: Auto tracking, split and series reservation in the programme guide
are enabled only when Recording's Start/end time is set to on time.
GB-44
Recorded Programme
File
Programme
Fitth Gear
Protect
Disable
Lock
Disable
Cancel
Save
Delete
Select
Edit
Sort
HDD Control
Free
Used
Reserved
Total
(90.5% Free)
Format
: Format a hard disk drive
Record
Recorded Programme
Recording Schedule
HDD Control
On Time
Recording's Start Time
Recording's End Time
On Time
1 min early
2 min early
3 min early
5 min early
/
Select or set the option
Play