Interrupting Or Restarting A Programme; Altering The Settings; Cancelling A Programme; At The End Of A Programme - Miele M 6262 TC Operating Instructions Manual

Operation
Interrupting or restarting a
programme
At any time you can . .
. . interrupt a programme:
 Touch  or open the appliance door.
The time stops counting down.
. . continue a programme:
 Close the door and touch Start.
The programme will continue.

Altering the settings

If you discover after starting a
programme that . .
. . the microwave power level is too
high or too low, you can
 select a new level.
. . the duration set is too short or too
long, you can
 interrupt the programme (touch ),
use the time selector to set a new
duration and continue the programme
by touching Start.
Or alternatively:
 use the time selector to change the
duration and continue the programme
by touching Start.
Or alternatively:
30
 touch Start during operation to
increase the cooking duration. Each
time Start is touched, the cooking
duration increases by another minute
(exception: the cooking duration is
increased in increments of
30 seconds when the maximum
microwave power level is being
used).

Cancelling a programme

 Touch  or open the appliance door.
The time stops counting down.
 Touch .

At the end of a programme

A signal tone will sound when the
cooking programme is complete. The
interior lighting goes out.
The signal tone is repeated several
times. The signal tone will sound briefly
as a reminder in regular intervals during
the first few minutes after the end of the
programme. You can deactivate this
function (see "Changing settings").
 If you want to stop the signal tone,
touch .