Table of Contents
Advertisement
Figure 1. Front and Rear Panels
System Requirements
• Internet access from your local telephone company or Internet
Service Provider (ISP) using a DSL modem or cable modem.
• A PC using a fixed IP address or dynamic IP address
assigned via DHCP, as well as a gateway server address and
DNS server address from your service provider.
• A computer equipped with a 10 Mbps, 100 Mbps, or
10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet
converter.
• TCP/IP network protocol installed on each PC that needs to
access the Internet.
• A Java-enabled web browser, such as Microsoft Internet
Explorer 5.5 or above, Firefox 1.0 or Mozilla 1.7 installed on
one PC at your site for configuring the Base Station.
Connect the System
The Base Station can be positioned at any convenient
location in your office or home. No special wiring or cooling
requirements are needed. You should, however comply with the
following guidelines:
• Keep the Base Station away from any heating devices.
• Do not place the Base Station in a dusty or wet
environment.
You should also remember to turn off the power, remove the
power cord from the outlet, and keep your hands dry when you
install the Base Station.
Basic Installation Procedure
1. Connect the LAN: Connect the Base Station to your PC,
or to a hub or switch. Run Ethernet cable from one of the LAN
ports on the rear of the Base Station to your computer's
network adapter or to another network device. You may also
connect the Base Station to your PC (using a wireless
client adapter) via radio signals.
Advertisement
Table of Contents
