Panasonic VL-SWD273 Installation Manual page 11

3
Connect the wires.
Loosen the screws. Push in the wires to the
terminal connectors (non-polar), then tighten
the screws (A, B).
A
A Terminal for the main monitor
B Terminal for the electric lock
A/B – Recommended torque: 0.5 N·m
{5.1 kgf·cm}
– Maximum torque: 0.7 N·m {7.1 kgf
cm}
4
Attach the doorphone to the mounting base.
A
A Screws (accessory) × 4
When using mounting box (option):
Model No. VL-MB554
Attach the doorphone to the flush
mounting box.
B
A
A Screws (accessory) × 4
5
Attach the name plate (A) (accessory) to the
doorphone and use screw A (B) to secure the
front panel.
R Write the name on the name plate as
needed.
B Recommended torque: 0.35 N·m
{3.6 kgf·cm}
A
B
11