Ir Sensor; Batteries; Cleaning - Philips 32HFL5011T User Manual

1 -  Volume
To adjust the volume level.
2 - Number keys
To select a channel directly.
3 - SUBTITLE
To switch Subtitles on, off or on during mute.
4 -  CLOCK
To display the clock.
5 -  Channel
To switch to the next or previous channel in the
channel list. To open the next or previous page in
Text/Teletext. To start the next or previous chapter on
a disc.
6 -  Mute
To mute the sound or to restore it.
7 - TEXT
To open or close Text/Teletext.
6.2

IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
6.3

Batteries

If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
6.4

Cleaning

Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
20