Using Multiple Projectors; Projector Identification System For Multiple Projector Control; Setting The Projector Id - Epson EB-696Ui User Manual

Using Multiple Projectors

You can combine the projected images from two or more projectors to create
one large image.
• Before starting projection, make sure you set Multi-Projection to On
a
for all of the projectors.
s Extended > Multi-Projection > Multi-Projection
• Before starting projection, make sure you select the same color mode
for all of the projectors.
s Image > Color Mode
g g Related Links
• "Projector Identification System for Multiple Projector Control"
• "Adjusting Color Uniformity"
• "Adjusting the Lamp's Brightness"
• "Matching the Image Colors"
• "Adjusting RGBCMY" p.135
Projector Identification System for Multiple Projector
Control
When lining up multiple projectors to project images, you can correct the
brightness and color tone of each projector's image so that the images match
closely.
p.131
p.133
p.134
You can set a unique projector ID for each projector to operate them
individually using a remote control, and then correct the brightness and color
for each projector.
• In some cases the brightness and color tone may not match
a
• If brightness and color tone differences become more noticeable over
g g Related Links
• "Setting the Projector ID"
• "Selecting the Projector You want to Operate"

Setting the Projector ID

To control multiple projectors from a remote control, give each projector a
unique ID.
a
Press the [Menu] button on the control panel or remote control.
b Select the Extended menu and press [Enter].
c Select Multi-Projection and press [Enter].
p.129
Select Projector ID and press [Enter].
d
completely even after correction.
time, repeat the adjustments.
p.129
129
p.130