Samsung SDR-B85300 User Manual page 30

DVR Menu
Device
HDD
Go to "Main Menu" ; "Device" ; "HDD" to enter into the interface.
When HDD is connected, the system will automatically detect if the HDD is normal or not; if the HDD needs to be formatted,
select the HDD and format it. If the system detects the HDD is normal, the HDD status will be shown as "Normal".
• no.: Number of HDD connected to system.
• state: It shows the current status of the HDD. It will be available only when
the HDD is "Normal".
• free/total space: Remaining or total space of the HDD
• free time: Remaining time for the HDD recording according to current
setting for "Resolution", "Encoding Rate" and "Frame Rate" of image.
• Auto-overwrite: When set to Auto and the hard drive is full, the DVR will
overwrite the oldest files on the hard drive. When set to OFF and the hard
drive is full, the DVR will stop recording.
• format HDD: Format HDD for the first use.
M
Recording can only be performed when the HDD is in "Normal" state.
`
30_ DVR Menu